answersLogoWhite

0

It depends on the type of clutch linkage. If it's mechanical linkage the clutch could be worn and the rod dropped out. If it's a hydraulic clutch, the clutch master or slave cylinder could be worn out.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

How do you change clutch on Nissan almera?

clutch change method Nissan Almera


How do you fill the clutch reservoir on Nissan primastar?

Where do i fill clutch fluid on nissan primastar


What can the problem be when a 91 Nissan sat for a long time and the clutch pedal is stuck to the floor?

check your clutch fluid lines and your clutch fluid and also bleed the clutch and it should work just fine mine did the same thing and i had to replace a clutch line that was pinched


Where is the clutch fluid on a 1993 Nissan pickup truck?

Where is the clutch fluid on 1993 nissan pickup truck.


Where do you add clutch fluid to a 91 Nissan Maxima?

where do you add clutch fluid to 1999 nissan maxima


How do you change clutch 1993 Nissan Pickup?

Show us a video on how to change a clutch on a 1993 Nissan pickup truck.


Where is the clutch sensor on a 1986 Nissan pickup?

on the clutch pedal lever


Where is the clutch safety switch on a 1987 Nissan Pickup?

on your clutch pedal


Clutch pedal won't return 2000 Nissan maxima?

sounds like your slave cylinder is bad or your clutch, find your clutch fluid reservoir and see if its full ,if not look for a leak if there is a leak most likely that's the problem and needs replacing.


How do you adjust the clutch on a 94 Nissan pick up?

You cant it is a hydraulic clutch


What is wrong when you have to hold clutch to floor to put in gear on a 1985 Nissan 200sx?

If you have to hold the clutch pedal to the floor to engage gears in a 1985 Nissan 200SX, it may indicate a problem with the clutch system. Possible issues include low hydraulic fluid levels, air in the hydraulic lines, or a worn-out clutch master/slave cylinder. Additionally, the clutch itself could be worn or damaged, leading to insufficient disengagement. It's advisable to inspect the clutch system for leaks and functionality.


I replaced a 1991 Nissan 204sx slave cylinder. Now it will not build up pressure and the pedal stays to the floor. What is the problem?

You need to bleed the clutch