Fox Lake Racing P-51 Intake Manifold mounting bolt torque spec. is ( 18 lb-ft ) 25 Nm
Front caliper mounting bracket bolts torque to 57ft-lbs Front caliper pin bolts torque to 27ft.lbs Rear Caliper mounting bracket bolts torque to 38ft-lbs Rear caliper pins torque to 15ft-lbs
32ftlbs for the pin bolts
Torque specs for brake caliper bolts 2005 mazda 6
The caliper mounting bolts, both in the front and in the rear, require 39N-m, or 28.9 ft-lbs of torque.
The 350 cubic inch Chevrolet intake manifold bolts have a torque specification of Haiti pounds psi. The bolts should be torqued at 40 pound intervals.
what is the torque specifications for the intake bolts on a ford 4.2L?
torque for bolts upper intake 1999 ford taurus 3.0 dohc
Intake bolts should be torqued to 35 ft lbs in the appropriate sequence. There should be 12 total "intake" bolts
Front caliper bolts 25 ft/lb Mounting bracket bolts 80ft/lb
The torque should be around 11 ft-pounds
I FOUND THIS AT WWW.AUTOZONE.COM, CLICK ON VEHICLE SPECS . For your 1999 CHEVROLET TRUCK BLAZER 2WD: INTAKE BOLT TORQUE FOOT POUNDS (FINAL TORQUE) TORQUE LOWER MANIFOLD BOLTS TO 27 IN/LBS TORQUE LOWER BOLTS TO 9 FT/LBS TORQUE LOWER BOLTS TO 11 FT/LBS TORQUE UPPER MANIFOLD BOLTS TO 44 IN/LBS TORQUE UPPER MANIFOLD BOLTS TO 7 FT/LBS (TO TORQUE BOLTS & NUTS, START IN CENTER USING CRISSCROSS PATTERN)
Long mounting bolts 22-29 ft lbsShort mounting bolts 96 - 132 in lbsPulley bolts 108 - 132 in lbs