The eye(round ends of the main spring, that the bushing goes in), leafs, center bolt and rebound clips.
With a Toyota leaf spring removal tool. Just go to your local Toyota dealer, head into the parts dept, and tell 'em you need a leaf spring removal tool for a 92 pick up. If their any kind of dealer, they will have it in stock.
Attaching a leaf spring to a chassis
A set of leaf spring that is so mounted that it is at right angles to the length of the Vehicle is known as the transverse leaf spring.
the eye of a leaf spring, assuming u mean the eye at end of spring, is used to bolt the spring to the vehicle
You might try an auto parts store -- leaf spring shims.
optimized dimensions of a mono leaf composite spring
mono leaf
the leaf spring on a vehicle's axle is an example
leaf spring front pivot bolt 115 ft/lbs leaf spring rear upper shackle bolt 115 ft/lbs leaf spring lower shackle bolt 80 ft/lbs
No. A coil spring has coils, no leafs. A leaf spring has leafs, anywhere from one leaf to many leafs depending on the application.
A leaf spring may be classed as "bad" under the following conditions: Ride height is noticeably reduced; spring leafs are cracked or broken; spring eye bushings, pins or shackles are worn. Most leaf springs can be rebuilt at your local spring shop.
The amount of curvature given to the leaf and observed from the main leaf upto the point just below the centre of the either of the end eyes of the spring.