0
What else can I help you with?
What are the cylinder head torque settings for a fiat punto 1.1 55?
Fiat do not issue torque settings for a punto they use angles so that you can snap your stretch bolts! after contacting fiat and haynes neither of them would give proper torque settings, so i delved into my many tech manuals on fiat fire engines which is what is in your punto and i have successfully changed many fiat punto head gaskets using the following torque settings: stage 1 starting from the centre head bolts tighten to 33nm: stage 2:65nm and finally stage 3: 96nm these torque settings work fine and will probably save you buying new head bolts.
What are the cylinder head torque settings for a fiat punto 55s?
Fiat do not issue torque settings for a punto they use angles so that you can snap your stretch bolts! after contacting fiat and haynes neither of them would give proper torque settings, so i delved into my many tech manuals on fiat fire engines which is what is in your punto and i have successfully changed many fiat punto head gaskets using the following torque settings: stage 1 starting from the centre head bolts tighten to 33nm: stage 2:65nm and finally stage 3: 96nm these torque settings work fine and will probably save you buying new head bolts.
What are the rocker cover torque settings of a fiat punto?
8-10Nm
Flat punto 96 1200cc touqe settings for cylinder head bolts?
The torque settings for a 96 Fiat Punto 12cc for cylinder head bolts are 30 NM at 90 degrees. Then an additional 90 degrees.?æ?æ
What are the torque settings on fiat punto thermostat?
The torque settings for the thermostat housing on a Fiat Punto typically range from 10 to 15 Nm (Newton meters). It's essential to follow the manufacturer's specifications for the specific engine model, as torque settings may vary slightly. Always use a calibrated torque wrench for accuracy and ensure that the bolts are tightened in a crisscross pattern to achieve even pressure.
What are the cylinder head torque settings for a fiat uno 1100?
30nm 90degrees and then another 90degrees
What are the cylinder head torque settings for a fiat 1.3 multijet?
20nm 40nm 90degrees 90degrees
Fiat uno 1.1 fire camshaft torque settings?
The Fiat Uno 1.1 Fire (Fully Intergrated Robotic Engineering) motor is the same in the Fiat Punto 1.1. The torque settings as per Autodata is Camshaft carrier cap - M8 x 1.25 20Nm or M8 10Nm Camshaft gear - 70Nm Anything else, just ask
What is fiat punto head bolt tightening sequence and torque?
It is important to know the head bolt tightening sequence and the torque of a vehicle. For the Fiat Punto it is 20nm, 30nm, 90 degree turn, 90 degree turn, then in order 8,6,2,5,10,7,3,1,4,9.
What are the cylinder head torque settings for a Fiat Punto 60?
firstly tighten in sequence to 20Nm all round, then tighten to 30Nm all round,then tighten 90 degrees all round, and finally tighten a further 90 degrees all round. good luck!.
When was Fiat Punto created?
Fiat Punto was created in 1993.
Torque settings for your fiat 80 90 tractor?
The torque settings for a Fiat 80-90 tractor can vary depending on the specific component being tightened. Generally, for the cylinder head bolts, a common torque specification is around 50-55 Nm (Newton-meters). Always refer to the manufacturer's service manual for the precise torque specifications for various components, as using the correct settings is crucial for optimal performance and to prevent damage.
