0
What else can I help you with?
How can a adjust the clutch pedal on my 1993 Chevy s10 pickup to make it disengage the clutch closer to the floor?
where and how to adjust clutch pedal 1993 s10 It is hydraulic operated, there is no adjustment.
When the driver pushes the clutch pedal down the clutch disengage from the engine?
True
2005 Sunfire clutch is stuck to the floor?
Well, we need lots more information here. Is the clutch pedal actually "stuck" to the floor? In other words, can you NOT lift the pedal up to the normal position? OR, has the clutch pedal "fallen" to the floor due to no resistance from the clutch?
Why doesnt Clutch disengage when pedal is depressed on my 1970 VW bettle?
Clutch plates are sticking - get your clutch checked you might need a new one
Why does your clutch pedal touch the floor?
It's called: Your clutch is working.
Why wont clutch disengage Replaced clutch on 92 240sx after trans swap and clutch will not disengage Cylinders are moving and fork is moving what else could it be?
It could possibly be your clutch pedal height. I had to fix the problem in my car, had the same thing happening. Go to your local shop or look up on the interweb and find out how to adjust the clutch pedal height.
How can you shorten your jeep wrangler clutch pedal distance?
Not really, but if it seems like you have to push all the way to the floor to disengage try this. Check this first if the pedal seems to have some slack, there is a bushing on the pedal where the arm for the clutch master cylinder attaches, this gets worn out and you will have to push the clutch all the way to the floor to disengage, replace this bushing and you will have full pedal again, its a simple operation so anyone can do it. Note, ask for the bushing for the 2004 model, Jeep has its diagrams messed up and will give you the wrong one if you go earlier than that, it looks like a little black cage, pop it into the arm, then onto the stud on the pedal, it will lock into place and viola.
Where is the clutch inhibitor switch located?
Its at the top of the clutch pedal there is a cruise control switch disengage switch at the bottom and the one above that is the clutch inhibitor switch.
Why does my clutch pedal go straight to the floor and stays down with no pressure?
You have a broken clutch.
Rover mg zt clutch pedal gone to the floor?
The clutch cable has proabably broken.
How do you adjust the clutch on a 2008 Chrysler pt cruiser?
depress the clutch pedal to the floor several times
How to Adjust clutch pedal height peugeot 307?
To adjust the clutch pedal height in the Peugeot 307 locate the adjuster bolt on the floor under the clutch pedal. Loosen the bolt and pull out the pedal to the proper height then tighten the bolt. To make the clutch pedal lower for the operator simply push in on the clutch pedal while the adjuster bolt is loose, then tighten the bolt.
