0
What else can I help you with?
Why does the clutch on oblivion in Alton towers don't work?
It doesnt work because oblivion has been running for a long time in alton towers and the clutch has now been over used so i doesnt work
Cannot get all the air out of the hydraulics after bleeding the clutch?
a mechanic can prssure bleed the clutch to remove air. usually this cannot be done by the home handyman. if that doesnt work, there is still a leak somewhere in system that is letting air in answers vacuum bleeder -from the slave ,figugre out a way to unbolt the slave cylinder with fluid pipe installed tight already,it has to be disengage from the fork,then vacuum bleed it like you do brakes without a hassle,then install the cylinder.
What do you do when clutch won't engage?
So to me, " wont engage" means that you release the clutch and the car doesnt move. The clutch " wont disengage" Means that you step on the clutch but you cant get it to go into gear because the clutch didnt work. So the first one, wont engage. The clutch is worn or the pressure plate is busted. You need to pull the transmission and get into it and replace what is bad. The second one. Could be the fluid level is low or has air in it. Try changing the fluid and bleeding the air out of it. When under the car check the metal rod that pushes on the clutch throw arm. It should be moving in and out. Occcasionally the seal breaks and fluid runs out. If not trouble shoot the issue until it does move in and out at least 25 to 30mm. If this is good and moving in and out OK then the throw out bearing, pressure plate or clutch inside the housing is bad. You gotta pull the transmission and look inside to fix it.
How does doodle feel about his nickname?
he doesnt like it and he feel embarrased about it. he is depressed because everyone wont stop calling him that
Sometime when I come to a stop sign on my motorcycle 03 R6 and put the clutch in the bike doesnt idle and just dies Any ideas as to what might be wrong?
check oil level in your hydraulic clutch if you have a hydraulic clutch. If not and it is a cable clutch check and make sure your clutch is adjusted properly. It may not be disengaging when you pull the clutch lever.
Why doesnt a manual transmission go into neutral when the clutch pedal is fully pressed?
Probably do to a bad pressure plate and or clutch plate. I would first check linkage adjustment and slave cylinder before changing clutch.
How do ya adjust a clutch pack on a 84 shadow VT700c?
The clutch is non-adjustable. It uses hydraulic fluid to release the clutch. If you are experiencing a dragging clutch, check your plates for warpage. This bike uses a 'slipper' type clutch so having the correct plates in certain places is important. If you have not changed your plates and they are the originals, check that the clutch fluid doesnt have air in it.
How do you get 2009 sportsman 500ho top dead center when it doesnt have a pull cord?
Turn the clutch by hand!
What should you do if you are having thoughts of suicide but are not really depressed?
That doesnt make sense you probably either are depressed or really want attention.... tell some one about it and talk to you parent s about antidepressants even if you arent depressed and or are really stressed it will SERIOUSLY help big time.
My 97 Saturn goes in gear easily with or without pushing clutch down and then it doesnt go whats wrong?
You have no clutch left. May of worn to the point it's not grabing or the clutch face may have blown off all at once. If you dump the clutch to often it can go all at once.
96 camaro 6 speed when you try to burn out it seems like it doesnt have enough power?
clutch slipping????
Would a shih tzu who is depressed drop his tail?
Yes or else maybe it doesnt feel good or could possiblely be stressed
