tub drains can leak from several locations .The tub drain it,s self,the trap,However most leaks on tubs come from the tub valve or from the walls needing caulk Call a plumber for a price .Then plan to get your hands a little dirty an keep looking you will find it
Yes, the gasket between the overflow pipe and the tub can go bad, or it can leak around where the pipe is attached to the drain.
You can access the tub drain by cutting through the ceiling below, or cutting through the side wall backing up to the tub.
To connect the drain in a walk-in tub, start by positioning the tub in its desired location and ensuring the drain line is accessible. Attach the drain assembly to the tub’s drain outlet, typically using a gasket and securing it with a nut. Connect the other end of the drain line to your home's plumbing, ensuring all connections are tight and leak-proof. Finally, test the drain for leaks by running water and checking for any issues.
The drain breather on a tub is called an overflow drain.
To determine if your tub is leaking from the overflow drain, fill the tub with water and observe if the water level rises above the overflow drain. If water is leaking from the overflow drain while the tub is filled, then it is likely that the tub is leaking from the overflow drain.
It is not possible to remove a tub drain without using any tools. Tools such as a drain key or pliers are typically needed to unscrew the drain and remove it from the tub. Attempting to remove a tub drain without tools may cause damage to the drain or the tub itself.
To properly connect the tub drain to the waste pipe, you will need to ensure that the drain assembly is securely attached to the tub and that the waste pipe is properly aligned and connected to the drain. This typically involves using a drain wrench to tighten the drain assembly and using PVC glue or plumber's putty to seal the connection between the drain and the waste pipe. It is important to follow the manufacturer's instructions and local plumbing codes when making this connection to ensure a proper and leak-free installation.
Common signs of a bathtub overflow drain leak include water pooling around the tub, water stains on the ceiling below the tub, and a musty smell in the bathroom. Solutions for this issue may involve tightening the overflow cover plate, replacing the gasket or seal around the overflow drain, or resealing the connections with plumber's putty or silicone caulk.
To replace a tub drain, you will need to remove the old drain using a drain removal tool or pliers. Then, clean the area around the drain and apply plumber's putty to the new drain before inserting it into the tub. Tighten the new drain securely using a drain wrench, and test for leaks by running water into the tub.
Once the old tub gets into the drain it is impossible to remove.........
Lots of things
Usually. Going through the overflow drain gets you straight into the drain without having to make the sharp bend in the tub drain. There could be a trap that comes apart in the drain underneath if it is accessible.