That would be traction control, it kicks in when when on slippery surfaces, in some models you can turn it onor off with a button on the shifter.
With a soldering iron?
It is behind the light switch in the instrument panel.
remove the trim panel around the instrument cluster then remove cluster. On the back of instrument cluster are the bulbs just turn them half a turn and they come right out.
To change a light bulb in the instrument panel cluster of your 1988 Chevy G20 van, first disconnect the battery to ensure safety. Remove the dashboard cover by unscrewing any screws or clips, then carefully pull out the instrument panel. Locate the burnt-out bulb, twist it counterclockwise to remove it, and replace it with a new bulb. Reassemble the instrument panel and dashboard cover, then reconnect the battery.
It will be called and instrument fuse. It will be located in the fuse panel under the dash, drivers side.
light in instrument panel go dim can i ajust it
you cannot service panel lights on 2000 impala . you hav to replace the instrument cluster.
The light switch could be bad. More than likely there is a short in the instrument panel cluster or a bad ground.
i have dash light problems also and my easy fix is just hitting the dash . the lights all work again after i do!
Remove the instrument panel cover retaining screws. There are four screws that need to be removed. The instrument panel light bulb's will be visible. Push the light bulb in and turn at the same time to remove the light bulb.
How do you change the light bulbs in the instrument panel in 1998 Toyota corolla
In a 2006 Chevy Cobalt, the radio fuse is located in the fuse panel inside the vehicle. This panel is typically found under the dashboard on the driver's side. To identify the specific fuse for the radio, refer to the diagram on the fuse panel cover or consult the owner's manual for the exact fuse number and location.