A buss bar essentially acts as a big, thick wire. It exists to distribute electrical power with little resistance and consequently little power loss.
AnswerA 'bus bar' (not'buss' bar) is usually a strip of heavy-duty rectangular-section copper conductor, at line, neutral, or earth potential, to which a number of individual circuit conductors can be connected. It provides a common point of connection for several circuit conductors. The origin of the word, 'bus', comes from 'omnibus' -which means 'providing for many things at once'.
Read more: What_is_a_buss_bar
Generally, a bus or buss is a point at which which multiple circuits converge and are electrically common. This can be done through a buss bar intended solely for that purpose (as below) or any point in a system where power is distributed among multiple paths. A buss bar is a strip or bar of copper. brass, or aluminum that conducts electricity within a switchboard, distribution panel, substations, battery bank, or other electrical apparatus. Its main purpose is to conduct electricity, not to function as a structural member.
There are several busses in PC motherboards, but you probably mean the Front Side Buss. This is a set of parallel conductors that all of the data in a PC travels to and from the CPU by. It's called a buss, as in the old term "buss bar", because all of the peripherals in the PC connect to it in parallel. Each peripheral only read/writes to this buss when it is addressed by the CPU.
Jimmy Buss's birth name is Jim Buss.
Johnny Buss's birth name is John Buss.
Frances Buss's birth name is Frances Martha Buss.
Jeanie Buss's birth name is Jeanie Marie Buss.
Jerry Buss's birth name is Gerald Hatten Buss.
A 'bus bar' (not 'buss') is usually a strip of heavy-duty rectangular-section copper conductor, at line, neutral, or earth potential, to which a number of individual circuit conductors can be connected. It provides a common point of connection for several circuit conductors. The origin of the word, 'bus', comes from 'omnibus' -which means 'providing for many things at once'.
Arcing between the bus bar and a breaker could be caused by loose connections, excessive load on the circuit, corrosion or physical damage to the components, or poor installation. It is important to investigate and address the root cause promptly to prevent damage and ensure safety.
Adam Buss is 5' 10".
Jason Buss is 6' 1".
Lance Buss is 6' 4".