0
What else can I help you with?
Why would a circuit breaker switch spark?
A circuit breaker switch could spark due to a buildup of heat or a high level of current flowing through it. This can lead to arcing between the contacts inside the breaker, resulting in sparking. Additionally, loose connections or damage to the breaker can also cause sparking.
What would cause a short periodic low hum to come from a circuit breaker?
A short periodic low hum from a circuit breaker could indicate loose connections within the breaker or surrounding wiring, internal mechanical issues within the breaker itself, or electromagnetic interference affecting the breaker. It's recommended to have a qualified electrician inspect the breaker to determine the exact cause and address any potential safety hazards.
Will cobwebs trip a breaker?
No, cobwebs alone will not trip a breaker. Breakers are designed to protect against overloading and short circuits, not cobwebs. However, if the cobwebs accumulate and cause insulation damage, it could potentially cause an electrical issue that may trip the breaker. Regular cleaning and maintenance can help prevent this.
What could cause a smell in the electrical panel?
That smell is caused by the panel and/or feeder cable overheating due to excessive current draw. This is a FIRE HAZARD!!!!!!! The electrician did you no favor by putting in a new main breaker. The old one was tripping to protect the wiring from overload. You should have had a whole new panel installed that could handle the load.
What causes the main breaker to trip from a fault current from a twenty amp branch circuit?
A fault current on a twenty amp branch circuit can cause the main breaker to trip due to the higher-than-normal flow of electricity, which exceeds the circuit's capacity. This could be caused by a short circuit (abnormal connection between conductors) or a ground fault (unintended connection between a conductor and ground). The main breaker detects this overload and trips to prevent overheating and potential fire hazards.
Why would a circuit breaker switch spark?
A circuit breaker switch could spark due to a buildup of heat or a high level of current flowing through it. This can lead to arcing between the contacts inside the breaker, resulting in sparking. Additionally, loose connections or damage to the breaker can also cause sparking.
Was changing a 30 amp breaker when I reset the main breaker there was a delay before power came back on?
Something is not right. My guess would be the main breaker is old and deteriorated. Breakers need to exercised to keep them operating free. Open and close them several times every six months. Hardened grease or corrosion will cause them not to snap over quickly or may have dirty contacts inside which delayed "make up" after some current burned through them. Check to make sure it is not getting hot or arcing which could cause a fire.
What could cause the pool to not come on?
The start capacitor could be bad. Is the Breaker tripped? Do you have a timer? Is it working properly?
How can I fix a breaker that keeps tripping?
To fix a breaker that keeps tripping, first identify the cause of the tripping, which could be due to overloading, a short circuit, or a faulty breaker. Then, unplug devices from the circuit, reset the breaker, and gradually reconnect devices to determine the cause. If the issue persists, consult a professional electrician to inspect and repair the breaker.
What is transfer trip protection scheme?
A scheme where a signal is sent to to a remote location to cause a trip. An example could be a breaker failure scheme. When the breaker is told to trip, and fails to do so, fiber communications could be used to transmit a trip signal from the local substation to the substation the next bus out to cause that breaker to trip.
Did my dryer trip the breaker or vice versa when I turned the breaker back on but now the dryer won't work?
The dryer tripped the breaker. Have it repaired. Don't try to use it again. You could cause a fire.
What happens when you put metal submerged in water in a microwave?
If metal is left unexposed in a microwave oven, the metal will deflect the microwaves and cause sparks. However, if it is submerged in water, the microwaves dissipate and are absorbed by the liquid. In turn, the water is heated.
What would cause a short periodic low hum to come from a circuit breaker?
A short periodic low hum from a circuit breaker could indicate loose connections within the breaker or surrounding wiring, internal mechanical issues within the breaker itself, or electromagnetic interference affecting the breaker. It's recommended to have a qualified electrician inspect the breaker to determine the exact cause and address any potential safety hazards.
Will cobwebs trip a breaker?
No, cobwebs alone will not trip a breaker. Breakers are designed to protect against overloading and short circuits, not cobwebs. However, if the cobwebs accumulate and cause insulation damage, it could potentially cause an electrical issue that may trip the breaker. Regular cleaning and maintenance can help prevent this.
What can cause a battery to get hot in a motor home and the motor is not running?
plates in the battery are arcing together. causing battery to short out and get hot. could explode. or you have a dead short in system. both will cause battery to get very hot.
Could fuse be out to cause furnace not to go on?
Yes, a blown fuse can cause your furnace to not turn on. Check the breaker box and see if any of them have tripped.
Can you replace a 15 amp breaker with a 20 amp breaker safely?
No, it is not safe to replace a 15 amp breaker with a 20 amp breaker without ensuring that the wiring and electrical components can handle the increased current. This could lead to overheating and potentially cause a fire hazard.
