answersLogoWhite

0

you have an electrical issue with your fuel pump circuit. in other words you need to check you're connections. there is a ground somewhere that there shouldn't be. corrosion maybe

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What does fuel pump relay primary circuit fault mean?

There could be a short to ground circuit . The fuel pump control circuit may also be sticking open which would also cause this fault.


What is the fuel pump secondary circuit fault on a 1994 ford ranger?

The secondary fault circuit is generally a poor connection in the fuel pump circuit or possibly bad fuel pump. Check connection on top of gas tank and be sure to check ground wires.


Where is fuel pump 2004 Jeep grand cherrokee limited?

If it is a 2.7 L diesel, the first is in the fuel tank, the low and high pressure pumps are at the front of the engine high up, the high pressure pump feeds the common rail. The filter is to the rear of the near side of the engine easily visable and is between the pump in the tank and the low pressure pump in the fuel circuit. fuel pressure is very high so take great care.


How do you know if your fuel pump is bad on a 1999 Durango?

If there is no fuel pressure and the fuel pump circuit, fuse and relay checks okay.


Is there a relay for the secondary fuel pump circuit?

YES


What does the code ff-22 mean on a 1993 xjs with the 4.0?

Fuel Fault 22: Fuel pump drive circuit. Checks for short or open circuit to pump relay. There's a full list of fault codes here: http://www.jagweb.com/aj6eng/fault_codes.php


Looking for code P0232 for F250 2006 with 6.0?

Trouble code P0232 means: Fuel Pump Secondary Circuit High


What does it mean by suction control valve in common rail diesel engine's high pressure fuel pump?

it controls fuel delivery to high pressure part of pump in common rail engines


Who is dtc number is 0756?

The DTC number 0756 corresponds to the "Fuel Pump A Control Circuit High" diagnostic trouble code. This code indicates that the Engine Control Module (ECM) has detected a high voltage condition in the fuel pump control circuit. This issue may lead to problems with fuel delivery, affecting engine performance. It's important to diagnose the underlying cause, which could involve wiring issues, a faulty fuel pump, or problems with the ECM itself.


Will a bad crank sensor not stop a fuel pump from running?

The crankshaft position sensor has nothing to do with the fuel pump but a defective fuel pump relay and fuel pump fuse will and also a missing ground circuit will cause it not to run


Why can't i get power to the fuel pump?

Fuel Pump Fuse, Located In With The Fuses. Or Relay, Also Open Circuit, Broken Wire.


What does a high pressure fuel pump do?

It pumps fuel at a higher pressure than a standard fuel pump.