0
What else can I help you with?
What happens if you use a 12 volt coil with a 6 volt system?
Probably not much because 6 Volts is not enough to power a 12 Volt coil
Do you replace the coil from a 6 volt to a 12 volt when converting from 6 volt to a 12 volt system?
Yes, when converting from a 6-volt system to a 12-volt system in a vehicle, you typically need to replace the coil with one that is compatible with 12 volts. This is because a coil designed for a 6-volt system may not be able to handle the higher voltage and could lead to issues with the ignition system.
How do you wire a 230 volt contactor with a 110 volt coil?
To wire a 230 volt contactor with a 110 volt coil, you need to connect the 110 volt power supply to one terminal of the coil and the neutral wire to the other terminal of the coil. Ensure that the contactor is rated for use with a 110 volt control circuit. Additionally, verify the wiring diagram provided with the contactor for proper connection details.
What is the number of turns in primary and secondary coil for 12 volt battery charger with 220 volt power supply?
what is the number of turns in the primary and secondary coil for 12 volt battery charger with 220 volt power supply> what is the number of turns in the primary and secondary coil for 12 volt battery charger with 220 volt power supply>
Why not no volt coil?
It is impossible to figure out the question.
What is no volt coil?
A no volt coil is a type of electrical coil that is designed to prevent a machine from automatically restarting after a power interruption. It keeps the machine in a safe state until an operator initiates a restart, reducing the risk of accidents or damage.
How to wire a 12 volt coil?
To wire a 12-volt coil, connect one terminal to the ignition switch's "hot" terminal and the other terminal to the distributor in the ignition system. Make sure the coil is grounded properly for it to work effectively in the circuit. Refer to the manufacturer's instructions or a wiring diagram for your specific vehicle to ensure proper installation.
Can you jump a 24 volt system with a 12 volt system?
No
Can you use a 6 volt relay to 230 volt circuit?
If you are talking about a 6 volt coil, yes, so long as the contacts are rated for the 230 volt circuit. If you are talking about 6 volt contacts, no, absolutely not.
What would be the result if a 24 volt 20-ohm low voltage contactor coil were wired in series with a 24 volt 200-ohm control relay coil?
Nine tenths of the voltage would appear across the 200-ohm coil.
Can a coil be made to fire not being on a car?
probably an old style 6 volt coil with an old-style 'lantern=battery' (6 volt) big fat square thing with the springs on top or old style 12 volt coil with like gas lawn mower key-start (completely sealed) battery /has male tabs/ on top. but coil will not hold a charge for later use.
Is a Packard 400 a 8 volt electrical system?
No. Is a 6 volt system.
