A 5 amp fuse is typically used to protect low-power electrical circuits and devices from overcurrent conditions. It is commonly found in household appliances, lighting circuits, and small electronic devices. When the current exceeds 5 amps, the fuse melts, breaking the circuit and preventing damage to the equipment or potential fire hazards. This ensures safety and reliability in electrical systems.
fuse number 1 is 10 amp fuse 2 is 25 amp fuse 3is 25 amp fuse 4 is a spare fuse 5 is 10 amp fuse 6 is a spare fuse 7 is 20 amp fuse 8 is 25 amp fuse 9 is 20 amp fuse 10 is 5 amp fuse 11 is 5 amp fuse 12 is a spare fuse 13 is 5 amp fuse 14 is 15 amp
1 amp
no you can't
A 5-amp fuse is designed to fail if more than 5 amps goes through it. A 6-amp fuse does likewise with more than 6 amps. Therefore, if you replace a 5-amp fuse with a 6-amp, you might be leaving components vulnerable to damage and wiring vulnerable to overheating, which could start a fire. If you replace a 6-amp with a 5-amp, the fuse will burn out if the circuit is drawing between 5 and 6 amps.
No.
well it might give you a clue, i would suggest a 5 ampere fuse for that 5 amp plug
A 13 amp fuse in the UK is typically colored red. This color coding helps to easily identify the fuse's rating and is part of a standardized system used to distinguish between different amperages. Other common fuse ratings include 3 amp (brown), 5 amp (blue), and 15 amp (yellow).
If you mean the fuse in the plug that connects to the mains... no more than a 5 amp fuse.
This is a unclear question, and not easy to answer. In your fuse panal, their will be a range of fuses, from 5 amp, up to 30 amp. On your fuse panal cover, should be a digram of your fuse panal, and which amp fuse goes into which slot.
In the UK, you cannot put a 5 amp fuse in a 3 amp plug. The general rule of thumb is that you should use like for like.
The 1965 Chevrolet Impala SS fuse box requires a 20 amp fuse for the taillights. A 30 amp fuse can be used when a 20 amp fuse is not available.
Chances are that you used a fuse that is not rated for this application. RE: you use a 5 AMP fuse in a 10 AMP application, and it blows real quick. Just try a higher rated amp fuse. Hope that helps.