0
Unfortunately the xdvd9101 has been built to were the bypass code doesn't work on it there are two options that you can choose from.
1. The toggle switch- Placed in line to fool the unit into thinking the car is in park done by flipping it on for 1 second then off and so on the unit should respond to it but it should work although you have to do this everytime you turn the car off.
2. Bypass module- Downside of this is it cost's a little extra but worth it in the long run for around $30 you can buy a bypass module that will make it so that the DVD player will always play no need to toggle or do anything besides hooking it up.
I prefer the second method but it will cost extra then the cost of a toggle switch but the module is pretty straight forward takes 10 minutes to install
What else can I help you with?
Can a toggle switch be used to bypass the parking brake for a dual xdvdn9131?
Yes! That's basically what the parking break is... a switch that turns it on and off.
Bypass parking brake for dual 9101?
So far (Nov. 2009) Dual has not released the permanent code for the 9101. The only thing you can do right now it the e-brake or a toggle switch. Happy motoring.
How do you bypass the parking brake on your dual xdvdn9131?
You know that is illegal right? Yes but that was not the question. Is there a code or can a toggle be used? No there is no code it how it's wired up. Ground out the parking trigger wire on the head unit.
How do you bypass the parking brake on a dual xdvd110bt?
If you're wanting to watch DVD's or use the rear camera while not in park, ground the pink "Brake" wire. Don't connect to 12v. Must ground it.
Parking brake bypass code for dual XDVD9101?
Unfortunately the xdvd9101 has been built to were the bypass code doesn't work on it there are two options that you can choose from. 1. The toggle switch- Placed in line to fool the unit into thinking the car is in park done by flipping it on for 1 second then off and so on the unit should respond to it but it should work although you have to do this everytime you turn the car off. 2. Bypass module- Downside of this is it cost's a little extra but worth it in the long run for around $30 you can buy a bypass module that will make it so that the DVD player will always play no need to toggle or do anything besides hooking it up. I prefer the second method but it will cost extra then the cost of a toggle switch but the module is pretty straight forward takes 10 minutes to install
What is parking brake bypass for a dual xdvd710?
heres the trick to the parking brake bypass procedure: 1. Go into Am/Fm mode 2. Hit "setup" on the remote control 3. Enter 543210 on the remote, listening for the beep for each number entered 4. A new menu will appear. Touch the button that has the hammer/screwdriver on it in the upper left-hand part of the screen 5. Select Brake bypass to "ON" and hit the "X" near the bottom of the screen. 6. Use the unit wisely and above all safely. A ticket is one thing, causing a fatal accident due to negligence is another. THIS WORKSSSSSSSSS
Park brake bypass code for a dual DVD player?
stop, stop...1234567890...hidden menu stop, stop...1234567890...hidden menu
Dual Air Brake Diagram .?
Dual Air Brake Diagram
What is the brake bypass code for a dual xdvd700?
Try playing a DVD Press Stop Twice Enter 26604 Press Enter Works on most models..
Brake bypass code for a dual xdvdn8190?
put a movie in 1. Press STOP twice on the remote 2. Enter: 26604 on remote 3. Press ENTER
Dual xdvd 9101 parking brake code?
1. stop the vehicle and make sure vehicle is in "park" 2. engage parking brake for 1 secound 3. release parking brake for 1 secound 4. engage parking brake permanently GOT THESE INSTRUCTIONS FRESH OUT OF THE BOX If you're looking for the code to override the parking brake settings, where the movie will play while in drive, this receiver has no code to override this. The only thing you can do is ground the cable to a grounded source(not to the parking brake mechanism) an install a toggle switch in line. Then flip the switch off for a second and back on. The movie will then show up on the screen. You'll have to mount a toggle switch somewhere in the vehicle, but at least that will make it play when the vehicle's out of park. This is so far the only thing I know that will work on this particular unit. If anyone figures out a way to modify the unit to work without a toggle switch, please let us know. I found this on amazon. I don't know if it works so am going to give it a try. Here's the link: http://www.amazon.com/Dual-Bypass-Lockout-Orignal-Automatic/dp/B0047X0W72/ref=sr_1_cc_2?ie=UTF8&qid=1296939798&sr=1-2-catcorr
How many brake systems must be equipped in a passenger vehicle?
A passenger vehicle must be equipped with at least two separate brake systems: the service brake system and the parking brake system. The service brake system is used for normal stopping during operation, while the parking brake is designed to hold the vehicle stationary when parked. This dual system enhances safety, ensuring that if one system fails, the other can still function effectively.
