answersLogoWhite

0

The GMA series of fuse is a fast acting glass tube fuse. The dimensions are 5 X 20 mm. This series of fuse's amperage span is from 63 mA right up to 8 amps. I would suggest that your fuse is rated at 250 mA or (1/4 of an amp) with a 250 volt rating.

User Avatar

Wiki User

9y ago

What else can I help you with?

Related Questions

What means t250l 250v on the glass fuse?

The markings "T250L" and "250V" on a glass fuse indicate its specifications. The "T" signifies that it is a time-delay fuse, which allows for temporary overload conditions without blowing immediately. The "250V" indicates the maximum voltage rating the fuse can handle safely, meaning it can be used in circuits with a voltage of up to 250 volts. The "250" typically refers to the current rating, expressed in milliAmperes (mA), which in this case is 250 mA.


What is the amperage of a t2l 250v fuse?

Darling, the amperage of a fuse isn't determined by its voltage rating. You need to check the markings on the fuse itself to find out its amperage. Don't go playing guessing games with electricity, honey. Stay safe and read the labels.


Can 250v 2.5A fuse replace a 250v 3.15A fuse?

No, it is not recommended to replace a 250V 3.15A fuse with a 250V 2.5A fuse. The replacement fuse should have the same voltage rating, but the amperage rating needs to be equal to or higher than the original fuse to ensure proper protection against overcurrent.


Can you use a 125V 15A fuse to replace a 250V 10A fuse?

No, it is not safe to replace a 250V 10A fuse with a 125V 15A fuse. The voltage rating of the fuse must be equal to or greater than the system voltage, and the amperage rating must be equal to or lower than the rated current of the circuit. Using a lower voltage or higher amperage fuse can lead to safety hazards, including potential fire risks.


What is the current rating of T2L 250v fuse?

The current rating is 2A (2 amps).


It is ok to use a fuse with a higher amperage rating and not ok to use a fuse with a smaller amperage rating why?

It is ok to use a fuse with a higher amperage rating and not ok to use a fuse with a smaller amperage rating why?


Can a 250V 2.5A fuse replace a 125V 2.5A fuse?

Yes, a 250V fuse can replace a 125V fuse if they have the same ampacity rating. The voltage rating is simply the maximum voltage that the fuse is capable of safely interrupting. You can go higher, but you can not go lower. Obviously, the form factor of the fuse must be the same, but that is often the case.


Will a fuse of a higher amperage rating have a higher melting point link?

No, a fuse of a higher amperage rating will not usually have a higher melting point link. The higher amperage fuse will use a wider link or a link of larger diameter.


What does L stand for in a fuse labeled T2AL 250V?

In a fuse labeled T2AL 250V, the "L" stands for "Low breaking capacity." This indicates that the fuse is designed to break the circuit under low fault current conditions. The "T" signifies that it is a time-delay fuse, while "2A" indicates the current rating of the fuse, which is 2 amperes. The "250V" specifies the voltage rating of the fuse.


Can T100L 250V fuse replace T80mA 250V fuse?

No, a T100L 250V fuse cannot replace a T80mA 250V fuse. The "T" indicates that it is a time-delay (slow-blow) fuse, while the numbers represent the current rating; 100L means 100 mA, and 80mA means the original fuse is rated for a lower current. Using a fuse with a higher current rating can pose a risk of overheating or damage to the circuit, as it may not blow in a fault condition. Always replace fuses with the same specifications to ensure safety and proper functioning.


Can you use a 250V 3.15A fuse to replace a 125V 3.15A?

yes. the 250v just means that's the maximum voltage rating the fuse can handle .. so it can def handle 125v. just not vice versa.


Can you use a 250v 3a fuse to replace a 250v 3.15 fuse?

No