answersLogoWhite

0

the firing order will be 1342 or 1243

User Avatar

Wiki User

20y ago

What else can I help you with?

Related Questions

What is the firing order for a 1985 Isuzu I mark?

1-3-4-2


Are All Of The 1988 Isuzu Mark Cars Stick Shift?

No, they also made an A/T car.


What is the firing order for a 1988 Lincoln Mark VII LSC 5.0 engine?

The firing order on a 5.0 Lincoln engine is 1-8-4-3-6-5-7-2 . The number one cylinder is on the drivers side, closest to the front.


What is the cylinder order for a 1988 Lincoln mark II LSC 5.0?

5.0 H.O. Firing Order: 1-3-7-2-6-5-4-8 Firewall48372615Front bumper


What is the Spark plug firing order for a Chevy 454 mark 4?

Knowing the firing order of a cars engine will help a person diagnose problems. The firing order of a Chevy 454 mark 4 is 1-3-4-2.


Is the firing order for a 1993 Lincoln mark 8 the same as a 1996 mark 8?

Yes


Where is the starter located on an 1988 Isuzu I-Mark?

On a 1988 Isuzu I-Mark, the starter is located on the lower side of the engine, near the transmission. It is positioned towards the front of the vehicle, typically on the driver's side. To access it, you may need to lift the vehicle and remove any underbody protection or components obstructing the starter's location.


What is the firing order for the coil packs on a 96 mark 8?

click the link.


What mark is your 1996 golf Chico 1.3?

firing order on chico 1.3 golf


What is the firing order jeep scrambler Where do you start counting?

The firing order should be on the intake manifold and you start counting on the cap where it is marked something like one? or a tick mark


What is the firing order on a Lincoln Mark LT 5.4 engine?

The firing order for a Lincoln Mark LT with a 5.4L V8 engine is 1-3-7-2-6-5-4-8. This firing order is typical for Ford's modular V8 engines and ensures smooth operation and balanced power delivery. It is essential for maintaining engine performance and efficiency during operation.


Whats the distributor order for a Isuzu rodeo 1992?

to find the dist-cap order ; 1. put timing mark on top dead center (TDC). 2. remove dist-cap see where rotor is at, that is #1 spark plug wire location on cap. From what I under stand the rotor turns counter clock wise. so next to left would be #2 ; ect. firing order is 123456 if what i see above this note about firing order ;;;; BUT I DON'T know if that is true. Could be but it's the 1st I've ever seen firing order in cylinder line order. NOTE: TDC can be 180% off so make sure your on compression stroke ...