what is the fork level height for a 1995 CR 125 honda
You can buy Honda fork oil or just use transmission fluid. Either will work.
330 cc
It is unlikely that the front fork assembly from a 1985 Honda 200X ATC will fit directly onto a 1984 Honda 110 ATC. ATC models have different frame dimensions and component designs across model years, leading to variations in mounting points and compatibility. It is recommended to find a front fork assembly specifically designed for the 1984 Honda 110 ATC for proper fit and function.
That would be each fork. 345cc or 11.7 oz. each.
The fork oil capacity for a 1984 Honda Magna 700 is approximately 10.6 ounces (or about 315 milliliters) per fork. It's important to use the recommended oil type, typically 10W fork oil, for optimal performance. Always check the owner's manual or service manual for specific maintenance guidelines.
110MM air gap from top of fork leg fully compressed with the springs out
Manual says 5.4oz
210 cc or 7.1 oz
for model 1996-2004 the oil capacity per fork is 477cc, or 82mm from the top of the fork tube when fully compressed (no spring inside)
For the 1996 Honda CR80R, the recommended fork oil level is typically around 90mm from the top of the fork tube when fully compressed and with the springs removed. It's important to use the correct type of fork oil, usually around 10-weight, but always refer to the owner's manual for specific details. Adjusting the oil level can help fine-tune the suspension performance to your preference.
For this bike, the front forks will hold 170cc or 5.8oz.