answersLogoWhite

0

What else can I help you with?

Related Questions

Where are the points located on a 1989 tw 200 Yamaha?

Yamaha doesn't use points. There's a magnet on the flywheel and a coil mounted next to the flywheel. When the magnet passes the coil, the spark is triggered.


Point gap spacing for five HP Briggs and Stratton motor on the flywheel to coil?

I think what you are wanting is the air gap between the flywheel and the coil . The gap is somewhere around .002 in , but if you will take 2 matchbooks take off the covers and use them for spacers between the coil legs and the flywheel . Role the flywheel around till the magnet pulls the coil in . Place the matchbooks between the coil arms and the flywheel and tighten the screws . Check the spark plug and make sure you have good fire .


What is the coil gap for a Briggs and stratton 6hp motor?

20 thousandths of an inch will suffice. Fairly forgiving ..........loosen the coil and place a standard business card between flywheel and coil. Allow magnetic force from flywheel to pull together and sandwich card between flywheel and coil. Tighten coil. This will work fine.


How do you set the timing on Yamaha g2 golf cart?

To set the timing on a Yamaha G2 golf cart, first ensure the engine is off and cool. Remove the timing inspection plug and use a timing light to check the timing mark on the flywheel against the mark on the engine case. Adjust the timing by loosening the ignition coil mounting screws and rotating the coil until the desired timing is achieved. Finally, tighten the screws and recheck the timing to ensure it is correctly set.


What is the gap setting between flywheel and coil on a small engine 3tpxs1481ba?

What I do at the shop is fold abusiness card in half . Put it in between the Coil and Flywheel. Bring the magnet around to Coil and tighten screws down. Perfect gap!


How do you sett gap between flywheel and coil?

The coil has two bolts to hold it in position. Loosen both bolts, place a .010 - .014 feeler gauge (or business card) between the coil and flywheel, and tighten bolts. The size of the gap determines the timing of the engine.


What is the gap between coil and flywheel on a Briggs and straton 17.5 hp motor?

You can check the Briggs and Stratton website for the exact specs for you engine number. OR Most people use a standard business card between the flywheel and coil. That works fine. Just line up the coil flanges with the magnet part of the flywheel and the put the business card between them. The magnet will hold it in place. Then tighten the bolts holding the coil and you are ready to go.


What is the gap between coil and flywheel on a Briggs and straton 4.5hp motor?

dollar bill


Coil gap 6.5 lawn boy mn10323?

Air gap between coil module and flywheel should be .010 inches.


How do you find the distance between the coil and the flywheel?

If you are talking about a small engine such as a lawn mower, the air gap between the coil and the flywheel is usually is .015 to .020 of an inch. A piece of cardboard from a cereal box can be used as a gauge if you don't have the proper gauges.


How do you adjust coil on 3.5 Briggs and stratton?

The coil is usually held on by two small bolts. Loosening the bolts will allow the coil to move closer or further from the flywheel. Use a feeler gauge to set the gap between the flywheel and the coil arms. Re-tighten the bolts when your done.


How do you time a yamaha G9 golf cart engine?

To time a Yamaha G9 golf cart engine, first, ensure the engine is at TDC (Top Dead Center) on the compression stroke for cylinder number one. Remove the timing inspection plug to view the timing marks on the flywheel and align them with the mark on the engine case. Adjust the ignition timing by loosening the mounting screws on the ignition coil and rotating it slightly until the timing aligns correctly. Finally, tighten the screws and recheck the timing to ensure it's properly set.