0
What is the problem if your well runs dry but turning the electrical pump off momentarily and on again restores the flow of water?
If turning the pump off and back on restores water flow, the problem is not that your well has gone dry. the problem is in your pump.
AnswerIf this is a down-well water pump, there may be poor connections in the wiring from the surface to the pump, which reconnect when the pump jerks when it turns on and off. AnswerIf turning off the pump and restarting works then it may be as simple as sediments clogging the in-take.ANS 4 - The most likely cause is that your well's replenishment time is getting longer. -ie, it's taking longer to come back to the original static water level. This is a very common problem, especially if more or larger wells have been drilled in your aquifer recently.
Sometimes this can be fixed simply by lowering your pump a few feet if that's possible.( I used to do that a lot in my years as a well tech.) If that's not possible, the well must be deepened.
What else can I help you with?
What makes beetle cut of the engine when turning on the wiper?
more than like you have a serious electrical problem.
Why is the light not turning on?
The light may not be turning on due to a burnt-out bulb, a faulty switch, or a problem with the electrical wiring. Check these components to determine the cause of the issue.
Why does your car stall when turning corners?
If it only stalls in corners this indicates a serious electrical problem that will only get worse
Why is my compressor not turning on?
Your compressor may not be turning on due to a faulty electrical connection, a malfunctioning thermostat, low refrigerant levels, or a problem with the compressor itself. It is recommended to consult a professional HVAC technician to diagnose and fix the issue.
How much does an electrical motor 380V of 150 HP losses after turning on?
how much does an electrical motor of 380V AND 150HP losses of his effeciency after turning on
Why is the blower not turning on in my furnace?
The blower in your furnace may not be turning on due to a faulty motor, a malfunctioning thermostat, a clogged air filter, or an issue with the electrical connections. It is recommended to contact a professional HVAC technician to diagnose and fix the problem.
Why is the light switch not turning off?
The light switch may not be turning off due to a faulty connection, a broken switch, or a problem with the electrical wiring. It is important to check these components and possibly seek professional help to fix the issue.
Why is the main breaker not turning on?
The main breaker may not be turning on due to a faulty breaker, an overloaded circuit, a short circuit, or a problem with the electrical panel. It is important to consult a qualified electrician to diagnose and fix the issue to ensure safety.
Why is the heat pump compressor not turning on?
The heat pump compressor may not be turning on due to issues such as a faulty thermostat, electrical problems, low refrigerant levels, or a malfunctioning compressor. It is recommended to contact a professional HVAC technician to diagnose and fix the problem.
What causes the power steering on a 1997 Tahoe FWD to momentarily feel like the front wheels are on ice when turning left?
Its a common problem with the 95 to 99 Chevy tahoes. Theres a sensor by the steering colunm that goes bad. go to this forum with all the info. www.automotivehelper.com/topic317059.htm
Problem with turning the ignition in your jeep when starting the car how do you fix it?
Physically has a turning problem ? Try your spare key and still has the problem? Replace the ignition switch.
Why can't I turn off my hazard lights on 2000 Camry?
There may be a problem with your electrical wiring that is preventing your hazard lights from turning off. You should take your car to a Toyota mechanic.
