It doesn't have a carburetor. It has throttle body fuel injection and yes it has two fuel lines. One is the feed and the other is the return.
On a Lippon carburetor, the fuel lines typically connect to the fuel inlet and outlet ports. The fuel inlet line delivers fuel from the tank to the carburetor, usually connecting to the main body of the carburetor. The outlet line may lead to the engine or other components as needed. Ensure that the connections are secure to prevent leaks and maintain proper fuel flow.
There are two lines inside the tank. The short line with no fuel filter on the end of it goes to the inlet, (suction) side of the primer bulb. The long line inside the tank, with the filter on the end goes directly to the fitting on the side of the carburetor. The line, inside the air box from the outlet side of the primer goes to the remaining fuel line fitting on the carburetor. http://store.chainsawr.com/
There are two lines inside the tank. The short line with no fuel filter on the end of it goes to the inlet, (suction) side of the primer bulb. The long line inside the tank, with the filter on the end goes directly to the fitting on the side of the carburetor. The line, inside the air box from the outlet side of the primer goes to the remaining fuel line fitting on the carburetor. http://store.chainsawr.com/
To clean the carburetor on the 1979 Suzuki GS550, it is a good idea to empty the carburetor and remove all fuel lines. Then, replace the float and valve in the carburetor and clean the bowl. Fill the carburetor with fuel and flush several times.Ê
The small line from the tank (with the fuel filter) goes to the top port of the carburetor. The large line from the fuel tank goes to the center port of the primer bulb. The other port of the primer bulb goes to the bottom port of the carburetor.
The fuel pipe that feeds the carburetor is typically located in the engine compartment, running from the fuel tank to the carburetor itself. It is usually positioned along the chassis or near the engine, connecting to the carburetor inlet. In some vehicles, the fuel line may be routed through or around the engine, so it's essential to follow the specific routing for your vehicle model. Always ensure the fuel line is in good condition to prevent leaks.
Of course it has a fuel pump. It is mechanical and is mounted on the engine block. Follow the fuel lines from the carburetor and you will find it.
It is Fuel Injected and does not have a carburetor.It is Fuel Injected and does not have a carburetor.
There are two fuel lines that come out of the fuel tank - one with a filter at the end and one without. The line without the filter goes to the IN port of the prime bulb and continues from the OUT port to the top of the carburetor. The line with the filter goes from the fuel tank to the bottom of the carburetor.
To get fuel to the carburetor on your Kawasaki Prairie 300, first, ensure that the fuel shut-off valve is in the "on" position. Check the fuel lines for any blockages or kinks that might prevent fuel flow. If the carburetor is still not receiving fuel, you may need to clean the carburetor or inspect the fuel filter for clogs. Additionally, ensure that the fuel tank has an adequate supply of fuel.
Mounted on the engine block. Follow the fuel lines from the carburetor backward and you will find the pump.