0
What else can I help you with?
What is the setting for the timing on a 92 Dodge Dakota with a 318 V8 2wd?
your timing is not adjustable. the pcm controls the timing. your dis. is index.
What is the timing setting for a 318 Dodge Magnum?
The timing setting for a 318 Dodge Magnum engine typically ranges from 5 to 10 degrees before top dead center (BTDC) at idle, depending on the specific model and year. It's important to consult the vehicle's service manual for the exact specifications, as timing can vary based on factors like engine modifications or emissions systems. Always ensure that the engine is at operating temperature and that the timing light is used correctly for accurate adjustments.
What is the correct timing for a 1969 Dodge 318 engine?
As far as timing, the engine calls for 5 BTDC originally,. You might want to run it closer to 12, unless you get any spark knock. 8 degrees is a good setting.
What are the timing degrees on a Dodge 318?
the timing degrees are 13 24 on the dodge 318
Should I disconnect vacuum when setting timing on 1983 Dodge 318?
yes, unhook the vaccum hose to the distribuetor to set the timing.
What is the timing setting for a 72 dodge charger?
Start the engine and point the timing light at the timing marks. The flashing timing light will cause the timing mark on the harmonic balancer appear to be stationary and aligned with the timing marker. It should be lined up with "10 BEFORE." If not, turn the distributor until it is. Turn off the engine and tighten down the distributor hold-down. Unhook the timing light. Read more: How to Set the Timing on a 1974 Dodge 318 Motor | eHow.com http://www.ehow.com/how_7405118_set-1974-dodge-318-motor.html#ixzz2S9e9ResE
What is the points setting for 1966 dodge D100 pick up 318 engine?
.017.
How much timing chain slack is to much on a dodge 318 engine?
1/4 MAX
How many cylinders does a 318 have for a Dodge Ram?
The Dodge 318 is a 8 cylinder engine.The Dodge 318 is a 8 cylinder engine.
How do you adjust valve timing in 97 318 dodge ram?
Valve timing is not adjustable on a stock engine. The timing chain is either installer correctly or not.
What the correct timing mark for a 1990 dodge ram 318?
whats the correct timing mark for a 1990 dodge ram pickup 318
What is the degree for timing on a 1999 dodge durango 318 Chrysler engine?
It is set to zero degrees with a scan tool. It can not be done with a timing light.
