0
What else can I help you with?
What is the function of camber in a car?
When camber specifications are determined during the design stage, a number of factors are taken into account. The engineers account for the fact that wheel alignment specifications used by alignment technicians are for a vehicle that is not moving. On many vehicles, camber changes with different road speeds. This is because aerodynamic forces cause a change in riding height from the height of a vehicle at rest. Because of this, riding height should be checked and problems corrected before setting camber. Camber specs are set so that when a vehicle is at highway speed, the camber is at the optimal setting for minimum tire wear. For many years the trend has been to set the camber from zero to slightly positive to offset vehicle loading, however the current trend is to slightly negative settings to increase vehicle stability and improve handling.
How do you set the timing belt on a 1990 Subaru Liberty?
There should be timing marks on the pulley & you simply align them. Crank at 12/cam at 6.
Does Camber have no effect on the amount of tire wear a vehicle experiences?
Camber affects the wear pattern on the tires and the amount. Wear on other mechanical parts should be well below the safety tolerances for such mechanics (bearings, suspension, etc.) Camber causes wear on the edges of the tire. Camber is the inward or outward tilt of the top of the tire.
What are the Caster camber settings for 1987 Chevy Celebrity?
According to the factory service manual: Castor service checking should be +1.7 degrees, but is not adjustable. Camber service checking should be 0 +- .5 degree Service setting is 0 degrees. I am not equipped to do wheel alignments so I have never really learned much about them, so I take mine to a shop. I hope that will be of some value to you, perhaps another can give any other information.
Should you buy a Subaru with 165k on it?
Think positive. Ask yourself: Why should I not buy a Subaru with 165K on it?
Cast and camber on rear wheels?
1984-1989 300zx's came with camber and toe in adjustments, so your back tires should look like they are moving towards the center of the car at the top....a little bit. If you have excessive camber it could mean that you need some new springs.
What are the front end alignment specs for 2006 jeep liberty sport?
The front-end alignment specifications for a 2006 Jeep Liberty Sport typically include a toe setting of 0.06 to 0.18 inches for both the left and right wheels. The camber should ideally be between -0.5 to +0.5 degrees, while the caster is generally around +3.0 to +4.0 degrees. These values can vary slightly based on specific configurations or modifications, so it’s always best to consult the vehicle's service manual or a professional for precise alignment settings.
Will a change in toe cause a change in camber?
Yes, a change in toe can affect camber. Adjusting the toe angle alters the relationship between the tire's contact patch and the road, which can impact how the suspension geometry interacts with the wheels. This interaction can lead to changes in camber, especially during cornering or under load, as the suspension components move. However, the primary adjustment for camber should still be made through dedicated camber settings rather than relying solely on toe changes.
Is a 1997 subaru legacy outback transmission the same as an 1998 subaru sus?
It should be.
Should i buy a Subaru Forester?
no.
Should Liberty Bell be capitalized?
Yes. It should be --- Liberty Bell.
What are the wheel alignment settings for a 1997Nissan Elgrand?
The wheel alignment settings for a 1997 Nissan Elgrand typically include a front camber of about -0.5° to -1.5°, a front toe of 0.0° to +0.2°, and a caster of approximately +3.0° to +5.0°. For the rear, the camber should be around -1.0° to -2.0°, with a toe setting of 0.0° to +0.1°. It's essential to consult the vehicle's service manual or a professional for the precise specifications tailored to specific driving conditions.
