answersLogoWhite

0

That would depend on the make and model of car.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What size are starter bolts for f250?

what size are the bolts that hold a starter on a 1995 f 250 powerstroke


What size bolts hold the alternator on a 1998 regal 2.8?

Dime sized bolts.


How many 5 gallon buckets in a wheelbarrow?

The number of 5-gallon buckets that can fit in a wheelbarrow depends on the size and design of the wheelbarrow. Generally, a standard wheelbarrow can hold about 2 to 4 buckets, depending on how the buckets are arranged and the wheelbarrow's capacity. It's important to consider the weight and balance when loading buckets to ensure safe transport.


What size bolts hold the spare tire carrier on a suzuki samauri?

If you are wondering about the thread size, they are the same as the Lug Bolts. 12x125 MM.


What size are the bolts that hold on the calipers on a 1999 Cadillac Catera?

The bolts that hold the caliper in place on a 1997 Catera are 3/4 inch. The bolts that hold the caliper together are 7/16 inch. Probably the same hardware.


In Australia how much can firefighting helicopter's water buckets hold and could you please tell me in liters?

In Australia, firefighting helicopters typically use water buckets that can hold between 1,000 to 3,000 liters of water, depending on the size and type of helicopter. Some larger helicopters may carry even bigger buckets, with capacities reaching up to 4,000 liters. These buckets are designed for rapid deployment to help combat wildfires effectively.


What size bolts hold calipers on a 1998 Chevy prizm?

You need 54mm bore bolts for a caliper for a 1998 Chevy Prism.


What is the maximum weight capacity that toggle bolts can hold?

Toggle bolts can typically hold a maximum weight capacity of 50 to 100 pounds, depending on the size and type of the toggle bolt.


What size bolts hold a starter on 1989 Ford F-250?

1/2 or 13mm or 9/16 or 15mm I can not remember right now which. It will have three bolts that hold it on. That is for a Diesel starter.


What size are the bolts that hold in the rear seat?

The size of the bolts that hold in the rear seat can vary depending on the make and model of the vehicle. Generally, they are often 10mm or 12mm bolts, but it's best to consult the vehicle's service manual for the specific size and type needed for your particular car. If you're unsure, using a socket set to test for the right fit is a practical approach.


What happens when you tie buckets of water to a rope and spin them?

the buckets will rotate. it is also likely that the rope will break, the buckets will fall, and the water will spill, mainly depending on the strength of the rope and size of the water-filled buckets


How many pallets of 5 gallon bucket to fill a shipping container?

The number of pallets of 5-gallon buckets that can fit in a shipping container depends on the container's size and the arrangement of the pallets. A standard 20-foot container can typically hold about 10 to 12 pallets, while a 40-foot container can hold approximately 20 to 24 pallets. Each pallet usually holds around 48 buckets, so you can calculate the total number of buckets by multiplying the number of pallets by the number of buckets per pallet.