0
For an 800-watt amplifier, it's essential to choose fuses that can handle the current draw without blowing too easily. Typically, you would calculate the fuse size based on the amplifier's current draw, which can be estimated by dividing the wattage by the voltage (e.g., 800W/12V = approximately 67A). Therefore, using a fuse rated between 60A to 80A is advisable, but it's best to refer to the amplifier's manual for specific recommendations. Additionally, using an ANL or AGU fuse type can provide better protection.
What else can I help you with?
If you have two 1400 watt subwoofers that have a 700 watt RMS should you get an amplifier that has the watts of both of the subwoofers together 2800 or should you get an amplifier with only 1400 watts?
get the 2800
Is a 200 watt guitar amplifier louder than a 100 watt guitar amplifier?
Yes
What fuses should you use for a 1200 watt amp?
For a 1200-watt amplifier, you should typically use fuses rated between 100 to 150 amps, depending on the specific amp's requirements and your system's overall configuration. It's important to refer to the manufacturer's specifications for the exact fuse rating to ensure proper protection. Using the correct fuse helps prevent damage to the amplifier and other components in the system. Additionally, consider using a fuse with a fast-blow characteristic for better protection against short circuits.
What size amplifier for 100w speakers?
For 100-watt speakers, a good rule of thumb is to use an amplifier that can deliver about 75-150% of the speaker's power rating. This means you should look for an amplifier with a power output of 75 to 150 watts per channel at the speaker's impedance rating (usually 4 or 8 ohms). This will ensure that the amplifier can drive the speakers effectively without distortion, especially at higher volumes. Consider your listening habits and the size of the room as well when selecting the appropriate amplifier size.
Is a 800 watt power amplifier can power a 1300 watt subwoofer?
yes/no
Can you run a 500 watt amplifier at low volume on a 140 watt ac converter?
Yes, you can run a 500 watt amplifier at low volume on a 140 watt AC converter. The power consumption of the amplifier will depend on the volume level it is set to. As long as the amplifier is not drawing more power than what the converter can supply, you should be able to use them together safely. Keep an eye on the power indicator on the converter to ensure it's not being overloaded.
How are quad 34 preamp and 306 power amplifier rated?
In watt watt watts
Do 15 watt speakers go well with a Kenwood four channel amplifier?
No, 15 watt speakers are rated far to low to be used with an external amplifier.
Can your cars battery hold up a 1200 watt amplifier with 2 12 inch 500 watts speakers and a 12 inch 1300 watt subwoofer?
Yes should be fine.
What is the best car amplifier for competition cars?
A 5000 watt digital monobloc amplifier is good for competition cars. The ICBM Giant 5000 watt is a favorite right now.
Can you use a 5800 watt amplifier with 2 12 inch 1400 watt woofers?
Yes, you can use a 5800-watt amplifier with two 12-inch 1400-watt woofers, but it's important to match the amplifier's output to the speakers' power handling to avoid damage. If the amplifier's power significantly exceeds the woofers' ratings, you may need to be cautious with volume levels to prevent overpowering the woofers. Additionally, ensure that the impedance of the woofers matches the amplifier's output specifications for optimal performance.
Can you use a 600 watt amp with a 500 watt subwoffer?
Yes, you can use a 600 watt amplifier with a 500 watt subwoofer. It is important to ensure that the amplifier's output power does not exceed the subwoofer's power handling capability to avoid damaging the subwoofer. It is also recommended to properly set the gain levels on the amplifier to match the subwoofer's power handling.
