0
What else can I help you with?
What size wrench to remove brake caliper bolt on 2002 gmc Yukon?
18mm
What size bolt should be used for the brake caliper?
The size of the bolt needed for the brake caliper depends on the specific make and model of the vehicle. It is important to consult the manufacturer's specifications or a professional mechanic to determine the correct size bolt for the brake caliper.
What size are the brake caliper bolts on a 2000 Monte Carlo?
.The 2000 Chevrolet Monte Carlo brake caliper bolt size is 9/16. The brake caliper bolt can be purchased at most auto-parts stores
What is the standard brake caliper bolt size for a typical car model?
The standard brake caliper bolt size for a typical car model is usually M10x1.25.
How do you get a piston in rear brake caliper to retract back into the caliper on a 2000 Mazda 626?
On the back of the caliper there should be a bolt its a 14mm you take it out and inside there is a bolt also its Allen key you use and Allen key and retract the caliper. it works on all 626 from 1994 till 2002
What size is the bolt to the brake caliper for 1994 Cadillac sedan deville?
The Rear Caliper Bottom Bolt head size is 12 mm. The Top bolt is enclosed only making it a slide bolt therefore you cant and really have no need to remove it. So the only bolt you should remove is the bottom 12mm head bolt. Then there will be a 14mm bolt that will hold the Emergency Brake Cable Bracket to the Caliper. Loosen this bolt and remove the Emergency Brake Cable Bracket from the Caliper. Then pry the bottom of the caliper up off the disc. This will allow you to swing the caliper up then push the caliper back to slide the caliper off the enclosed bolt slide at the top of the caliper. This will allow access to the inside and outside pads to remove them and allow you to press and rotate the Piston (Push and Twist-in Pistons) back into the Caliper with the right Brake Caliper Compression tool. The rear two Caliper Bracket bolt head sizes are 18mm. You must remove the Caliper bracket in order to remove the rear brake disc. The Front Brake Caliper Bolt is a 3/8" Allen head bolt. There will be two bolts holding the front calipers to the Spindle. The Front calipers are standard push-in Pistons.
How do you replace front caliper and pads to 2002 Kia Optima?
Jack up the 2002 Optima and remove the wheel. disconnect the caliper brake line and drain into a bucket. Unbolt the caliper, and remove it with the pads. Bolt the new caliper on and replace the pads. The brakes may be spongy and the new caliper will require bleeding.
What is the standard size of the brake caliper mounting bolt for a typical vehicle?
The standard size of the brake caliper mounting bolt for a typical vehicle is usually around 12mm in diameter.
What is the caliper bolt size for a standard brake caliper on a car?
The caliper bolt size for a standard brake caliper on a car is typically around 10mm to 14mm. It is important to consult the specific vehicle's manual or a professional mechanic for the exact size needed.
What is the brake caliper bolt size on a 2000 Chevrolet truck?
A 3/8" Allen wrench will remove that bolt on the front caliper.
Where is the brake caliper bushing on a 2004 trailblazer?
brake caliper bushings are the rubber mounts that sit inside the caliper bolt holes. They help guide the bolts when bolting the caliper up to the caliper bracket.
How do I remove a stripped head on a brake caliper bolt?
eat it
