0
What else can I help you with?
What Allen head is neede for calipers on 2006 mercury mariner?
7mm, you might need a socket extension to get the head of a ratchet past the brake line.
What tool do you need to remove the calipers from a 2007 Chevy Malibu ls?
15 mm socket and ratchet for the caliper to bracket. if not it is a 13 mm socket and ratchet. the bracket to spindle is 18mm socket and ratchet
What size Allen wrench do you need for front caliper bolts on mercury mariner?
9mm hex socket bit
Do you need special tools to take off the brake calipers?
It requires a socket that basically has a large Alan wrench tip on it.
What size tool do you need to replace brake pads on mercury mariner?
To replace the brake pads on a Mercury Mariner you will need a few tools. The tools you will need are a large C-clamp, a jack, tire blocks, and a 3/8 inch hex head Allen head socket.
Will 2002 dodge ram rims fit 2007 ram?
The heavy duty trucks need the calipers ground down to fit
How do I compress the back calipers on 2007 Kia Spectra?
You actually need a special tool. We went to Auto Zone and they can rent the tools to you.
How can you tell if you need new brake calipers?
If your calipers are leaking they need to be rebuilt or replaced. If the vehicle pulls to one side or the other when braking it could also indicate a problem with one of the calipers.
What is the caliper bolt size for a 1995 Kia Sephia?
I have a 1996 Kia Sephia. The calipers are the same stock # on the 1995 model. You need a Hex Bit Socket. Size : 7 MM Hope that helps. TC
What size sockets do you need to replace the brake pads and rotors on a 2002 Chevy Trailblazer?
Lug nuts to remove wheels 3/4" socket, bolts to remove the calipers 18mm, then pull rotor off.
What size tool is needed to remove caliper bolt on 2006 mariner?
To remove the caliper bolts on a 2006 Mercury Mariner, you typically need a 13mm socket or wrench. It's advisable to use a ratchet with an extension for better access, especially if space is tight. Always ensure to verify the size, as it can vary depending on any previous repairs or modifications.
What size wrench is needed to remove front axle nut on 2006 Mercury Mariner?
To remove the front axle nut on a 2006 Mercury Mariner, you will need a 32mm socket wrench. Make sure to use a breaker bar if the nut is tightly secured, as it can be torqued to a high specification. Always ensure the vehicle is properly supported before attempting any repairs.
