0
What else can I help you with?
What Allen head is neede for calipers on 2006 mercury mariner?
7mm, you might need a socket extension to get the head of a ratchet past the brake line.
What size hex socket do you need for the calipers on an 2007 mariner?
For the calipers on a 2007 Mercury Mariner, you typically need a 7mm hex socket to remove the caliper bolts. However, it's always a good idea to double-check your specific vehicle's manual or consult a repair guide, as variations may exist depending on the brake system used.
What size Allen wrench do you need for front caliper bolts on mercury mariner?
9mm hex socket bit
How do you replace the brake light on a 2003 Toyota Echo?
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.
Do you need a scan tool to replace brake pads and rotors on a 2005 XJ8L?
You do not need a scan tool to replace any brake pads. The wear is obvious.
When do you need to replace brake rotor?
when needing brakes do you have to replace the rotors to on a s60r
Why do your brake lights not come on when you press the brake pedal?
you probally need to replace the bulbs
Diagram of brake lines on 1993 topaz?
need diagram of rear brake lines for 1993 mercury topaz
What tools would you need to replace Front brake pads?
The tools you would need to replace front brake pads are, a wrenche (size varies depending on vehicle type), a clamp tool, and brake pads.
How many feet of brake pipe do you need to replace the brake line.?
measure affected line
How can I convert a cantilever brake system to a V-brake system?
To convert a cantilever brake system to a V-brake system, you will need to replace the cantilever brake arms with V-brake arms, install V-brake compatible brake levers, and adjust the brake cable tension accordingly. Additionally, you may need to replace the brake pads to ensure compatibility with the V-brake system.
How do you replace rear breaks on a 1995 mercury villager?
This is something you would be well advised to buy a manual for, as it is a complex operation, and you'll need illustrations if you're not familiar with working on brake systems.
