answersLogoWhite

0

What else can I help you with?

Related Questions

What is the best hand tool to use to tighten lug nuts?

There are a couple of different tools that are good for tightening lug nuts. A torque wrench and a lug wrench are good for tightening lug nuts. Typically lug nuts would be tightened with a torque wrench, but a lug wrench is much cheaper.


What is the size of wheel lug nuts of 2010 Honda Accord?

Use a 3/4" deep well socket.


What size wrench for the lug nuts on a 2006 Toyota Camry?

You do not use a wrench, you use a socket. It is probably a 3/4 inch, but may not be. Get your sockets out and try them until you find the one that fits. The lug nuts are not metric they are SAE. All other bolts & nuts on the car are metric.


How do you change Kia lug nuts?

KIA lug nuts are the same as other lug nuts on other car makes. To remove or tighten them, use a standard lug nut wrench or the one found in the trunk of your KIA.


What are the wheel lug nuts size for a 2007 jeep compass?

The wheel lug nut size for a 2007 Jeep Compass is typically M12 x 1.5. It's important to ensure you use the correct size and torque specifications when installing or removing lug nuts to maintain safety and performance. Always refer to the owner's manual or consult with a professional if you're unsure.


What are lug nuts and what are they used for?

Lug nuts are rounded pieces used to attach a vehicle's wheel to its axle. This ensures that the vehicle's wheel is secure. Failure to use correct lug nuts for your vehicle can result in wheel damage.


The Wheel on your M-30 covers the lug nuts so how do you go about getting this nut cover off to get to the lug nuts?

use a flat head screw driver.


What is the lug nut size for infiniti fx 35?

The lug nut size for the Infiniti FX35 is typically 12mm x 1.25. It's important to verify this with your specific vehicle's manual or a reliable source, as sizes can vary slightly based on the year and model. Always ensure that you use the correct size to avoid damaging your wheels or lug nuts.


Can aftermarket conical lug nuts be used with stock wheels from a 2006 dodge ram 3500 dually?

No, use only the flat washer style lug nuts on that truck.


How do you change the wheel cover in 1999 Ford contour SE?

I belive on Contours they just pop off. Use a screw driver to pry it from the rim. Some cars, use the lug nuts to help hold on the wheel cover. So, before you pry. Look to see if your lug nuts are exposed.(Don't confuse this with fake molded on lug nuts) Then, see if it looks like the wheel cover is between the lug nuts and rim. If not, pry them off. If the cover looks like its held on by the lug nuts you'll have to remove them. You'll have to jack up the car to do this. Just remember to "break" loose the lug nuts before you jack up the car.


Can you use regular nuts for lug nuts?

You can use a regular nut in place of a lug nut in an emergency situation and only for a short period of time. Lug nuts are shaped to "seat" into the hole on the wheel and ensure that the wheel is tight to the hub. A regular nut does not seat, or bottom out, and will allow the wheel to move and cause wear on the stud and the wheel itself.


How do you remove a lug nut?

Turn it counterclockwise on the vast majority of automobiles. There were some cars in the early days that did have lug nuts that had left handed threads on the left side of the car, but not today. An impact wrench will make quick work of removing lug nuts. Do not use a impact wrench to install the lug nuts. Use a torque wrench and tighten them to the exact specifications listed in your owner's manual. Otherwise you will warp the rotors.