It takes a 7mm allen wrench.
2006 lincoln navigator requires a 7mm hex to remove brake caliper
I believe that is a 7mm Allen.
To remove the front brake caliper on a 2005 Lincoln Navigator, you typically need a 7mm Allen wrench. However, it's always a good idea to double-check the specific caliper type, as some models may vary slightly. Ensure you have the right tools on hand before starting the brake replacement process.
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
7mm Allen
Jack up front end, remove wheels. Use Allen wrench or Allen socket to remove 2 pins holding caliper on . Remove caliper by sliding it off the rotor. Remove pads from caliper. Press piston back into caliper with c clamp. Replace pads, reinstall caliper and pins.
I believe that is 7mm Allen key.
3/8 inch allen.
That's a 7mm Allen key.
You need a 3/8" Allen wrench to remove them.
You need 3/8 Allen key.
A 3/8" Allen wrench will remove that bolt on the front caliper.