I have used 3" water pump pliers on almost every car I've ever had. Never seen an oil filter that requires a socket.
24 mm24 mm
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
Oil Filter is two types.First is Spin On disposable style and second is Canister with Element.Disposable type needs a Strap Wrench tool remove it. Installation is by hand and about 1/4 turn beyond seated.The Canister with Element style needs a 24mm socket to remove the filter head.Located on the drivers side (Left.) towards the bell housing or rear of the engine.
remove the center threads were the oil filter screws on it takes a socket to take off some an a Allen wrench on others. remove the center threads were the oil filter screws on it takes a socket to take off some an a Allen wrench on others. remove the center threads were the oil filter screws on it takes a socket to take off some an a Allen wrench on others.
9mm
You will need a 5/8 socket.
You will need a 35 mm socket.
To remove the oil filter on a Mini Cooper, you typically need a 36mm socket. However, some models may require a 32mm socket, so it's best to check your specific model year. Additionally, using an oil filter wrench can also be helpful for easier removal. Always consult your vehicle’s manual for the most accurate information.
You'll need a 5/8" socket.
9MM
A 11/16 socket is needed to remove the 1984 Chevrolet pickup front axle hub assembly. The socket should be a five-point socket.
The fuel filter is located at the rear underside held in by a bracket a 10mm spanner or socket will be needed to remove the bracket. The fuel pipes are normally push fit but be careful they can easily be damaged if forced.