0
To replace the struts on a 1999 Buick LeSabre, you'll typically need a 15mm socket for the upper strut mounting bolts and a 21mm socket for the lower strut bolts. Additionally, having a 10mm socket can be helpful for any associated brackets or components. Always ensure you have the proper tools and safety equipment before starting the job.
What else can I help you with?
What size sockets would you need to replace a starter in a 1986 coupe deville?
9/16
How do you replace an alternator on a 2002 VW Beetle?
2002 vw beetle alternator what size sockets do i need to do the job?
Need to replace all 4 struts on minivan how much?
Struts can cost anywhere from $25 to $350 each, depending on the make, model, and size of your vehicle. Depending on which mechanic you go to, it can take about four to five hours to replace all of the struts on your vehicle. Mechanics charge an average of $50 to $120 per hour which would put your grand total at $100 to $1400 for the struts and anywhere from $200 to $$600 for labor.Ê
How do you change the trunk struts in 2001 eclipse?
You will need a torx adapter (I don't remember the size). After that make sure that the trunk is supported by something. Because it's very heavy, and you do not want it to fall on your head. Then replace the struts one at time. Always change the struts in pairs.
What is deck belt size on a Sabre 1742?
A102
What size bolts hold starter motor on 1986 ford ranger?
It is a Metric size so you need metric sockets. Just keep trying different size sockets until you find the correct one.
What size tools are needed wrench or sockets?
Wrenches and sockets all come in multiple sizes. Which you have depends on the kind of work you do. Most craftsmen have a full set of metric wrenches and sockets and a full set of SAE wrenches and sockets. Most get by with 3/8 drive sockets, but many have 1/2 sockets as well.
What Battery size for Buick le Sabre?
12 volt. side post
How do you determine the size of the struts on a 2001 Honda civic si?
measure it
What are the differences between e11 and e12 light bulb sockets?
The main difference between e11 and e12 light bulb sockets is their size. E11 sockets are smaller and have a diameter of 11mm, while E12 sockets are slightly larger with a diameter of 12mm. This means that E11 bulbs are not compatible with E12 sockets and vice versa. It is important to check the socket size before purchasing a light bulb to ensure it will fit properly.
What size serpentine belt do you need to by pass the ac on a 1995 Buick Le Sabre?
just order a belt for a 95 Buick le Sabre without ac.
How do you replace license plate bulb on 2008 Pontiac G8?
You need to remove the liner on the trunk lid. That will give you access to the license plate lights housing. Remove the sockets by twisting 1/4 turn and replace bulbs. Size for bulbs are 2825
