0
What else can I help you with?
Can you replace 700R4 trans with TH350?
Yes you can, But the driveshaft won't be long enough.
You installed a th350 trans in a 55 Chevy the driveshaft fits real tight how much play should there be?
If you're talking about the length of the driveshaft, the front yoke should go into the transmission all but 1 inch.
Will a 1987 truck 700R4 work in a 1983 truck?
It will, although you might have to get the rear driveshaft shortened, as the 700R4 will be longer than the TH350 which was used in 1983.
Can a th350 bolt up to a 1956 Chevy 235 engine?
Yes, a TH350 transmission can be adapted to a 1956 Chevy 235 engine, but it requires an adapter kit since the TH350 uses a different bolt pattern than the original Powerglide transmission typically found on the 235. Additionally, modifications may be necessary for the linkage and possibly the driveshaft. It’s advisable to consult with a specialist to ensure proper fitment and compatibility.
What driveshaft can be used in a 81 Monte Carlo with a swapped th350 3spd tranny with a long tail?
i recently did the same on my 81 monte. her names carla! if you can track down a 78 thru 88 monte the 700r4 trans is to long but the 200r4 overdrive tranny is the same length and yoke as your th350. all monte g bodies were over drive but thr 200r4 and th350 are the same length! good luck and keep that monte on the road!!! see you at the light!
What gm overdrive transmissions interchange with a TH350?
700R4 and 200-4R can typically be used with minor modifications for most applications. Modifications are usually limited to driveshaft length, crossmember type or position, and downshift cable setup.
Is a TH350 transmission compatible with a chevy cheyenne 4.3L v6 engine?
Yes, a TH350 transmission can be compatible with a Chevy Cheyenne equipped with a 4.3L V6 engine, as the TH350 is a common automatic transmission used in many GM vehicles. However, you will need to ensure that the transmission's bellhousing is compatible with the engine and that the necessary modifications for mounting, linkage, and driveshaft alignment are addressed. Additionally, sourcing the correct torque converter and ensuring the transmission can handle the engine's power output is important for optimal performance.
Why would the th350 tranny in a 1983 el camino 305 make a clinging noise when you shift it into gear?
Most likely, it's the noise resonating along the driveshaft from slop in the rear end gear, u-joints or trans output shaft.
How much does a Chevy th350 trans weigh?
According to Novak Adapters, the TH350 weighs 120 lbs.
What is the electrical plug for on a th350 transmission?
if you have an electrical plug and its a th350. you have a th350C or lock up. it is to control; the lock up soliniod
Will a th350 transmission bolt to a Pontiac 400 motor?
Yes, assuming the TH350 has the Buick-Olds-Pontiac bolt pattern. A Chevy TH350 will also bolt up, but you will need an adapter from B&M or another supplier.
What a TH350?
It's a GM transmission.
