Power Steering box... Steering fluid level low,dirty or needs replacing... If power steering fluid is white then your box is damaged...
have it checked you could have bent the axle and the noise would be the bearing
If its front wheel drive possibly an axle.
Bad wheel bearings usually cause a grinding noise, and are known to only cause it when turning.
Check the brakes for worn pads. The pad backer scraping the rotor is the most common cause of this type of noise.
The ratchet winding noise on the Ranger 4x4 could be a wheel bearing or brake issue. There could also be problems in the front differential. Check all three for any problems.The 1998 Ranger noise is most likely coming from a brake grinding against a rotor, or a bad wheel bearing. Either of these can cause serious problems if left unchecked.
most grinding noises that come from turning is usually a cv axle that needs to be replaced. Can also be a bad wheel bearing. If you hear the grinding when turning to the right then the left front wheel bearing is bad.
97 grand am rubbing/grinding noise from right front that is not wheelbearing or brakes
If a car is making a grinding noise in the right back wheel, it could be a sign that a wheel bearing is failing. It is necessary to take the car to a qualified mechanic for repair.
Had same problem with mine, if you turn right and it grinds, the left hub bearing is going out and vice versa. The weight of the truck is placed on the bad bearing the opposite way you turn. Should sound like a grind but it is a consistent "noise""quiet""noise""quiet".
Bearings, cv shaft, or brakes.
Are the breaks worn or have they been recently replaced and could need new rotor. check your wheel bearing as well. turning left puts more stress on the right side of the vehicle, this could cause the grinding noise.
The grinding is a worn CV joint. Get it replaced before it causes more damage! A worn wheel bearing will make the same noise answer worn wheel bearings or worn brake pads will be the cause