0
What else can I help you with?
No turn signal or hazzard lights the fuses are good what could be the cause?
bad wiring in your steering column to the hand control?
Can a turn signal flasher cause turn signal lights to fail completely?
Yes.
What would cause signal lights to not work on a Ford Explorer?
Most likely turn signal flasher
What can cause signal lights to not work sometimes?
Forgetting to throw the switch.Answer #2Sometimes the control panel burn out, which causes power failure to the lights. Sometimes the signal switch becomes damaged. There are other problems that can cause traffic light failures but the most common reason is the bulbs burned out. Finally, you may wish to test your fuses.
What can cause head lights not to work no power to light?
head lights won't work, no power to them, signal works , reverse lights work
What would cause a fuse to blow and the abs and traction control lights to come on when you use your left turn signal?
bad wiring or ground somewhere in the harnesses or fuse box
What would cause the signal lights to not work in a 1995 Ford Contour?
have you checked the fuses?
What would cause your turn signal lights and your stereo lights to blink in sequence and why when the car is off and the break is pushed the dash lights come on?
Most likely poor wiring.
In a 1994 Chrysler Intrepid what is the cause of the dash panel not working aside from the signal lights?
check fuses
What cause your turn signal in the back not work when you turn on the head lights?
Check the tail light ground wires.
A right-turn signal causes the emergency lights to flash when the headlights are turned on. What is the cause of this problem?
A mis-wiring or short circuit somewhere between the controls, fusebox and lights.
Why doesn't the turn signal lights turn on but the hazard lights work?
If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
