Remove the seed tray cover once the seeds have germinated and the seedlings have developed their first set of true leaves. This typically occurs after a few days to a couple of weeks, depending on the plant species. Gradually acclimate the seedlings to the outdoor environment by removing the cover for a few hours each day before fully removing it. This process, known as hardening off, helps prevent shock and promotes healthy growth.
It's just under the ash tray, remove the ash tray and the panel cover is underneath it.
The tray bolts to the driver's seat. While the Tray is up, pop off the plastic part on the Driver seat that covers the covers up where the tray arm mounts to the driver's seat. Unbolt the two bolts securing the tray arm to the seat. Remove the tray, replace bols and cover.
push down on the top metal cover thingy and pull out, super easy
Choose a suitable container, such as a seed tray or small pots. Fill the container with a pre-moistened seed starting mix. Plant the seeds according to the instructions on the seed packet. Cover the seeds lightly with soil, water gently, and place the container in a warm, sunny location.
Dicotyledon is the word, which describe the type of seed. Seed can be divided into two parts, as you remove the cover of the seed. Very obviously the it's a seeded plant.
You will have to remove the valve cover and then the tensioner. After that take off the timing chain cover and then it'll come right out. It's about a 45 min job. I am at ureagletz@yahoo.com if you have anymore questions. Tray
behind the ash tray remove the ash tray remove the ash tray enclosure, remove the cigarette lighter remove the cigarette lighter cover, just pull it with your fingers remove the cigarette lighter enclosure. use a small Philips screwdriver to remove two (2) small screws. the fuel pump relay is the one on the left, center row. it is usually color white / beige. pull it straight up.
the folding tray OS bolted to the passenger seat. the passenger seat must be removed in order to unbolt the tray from the seat.Do not remove the passenger seat. remove the cover that attached to metal bracket of p. seat. it's mounted with two plastic screws. use flat screw driver to remove. then you will see 3 bolts on the bracket attached to p. seat. remove bolts and pull away.
To remove the drip tray from the fridge, locate the tray at the bottom of the fridge and gently slide it out. Empty the tray and clean it as needed before sliding it back into place.
Remove 2 bolts in front on the bottom of the engine cover. Remove 2 Phillips bolts in the ash tray area. and lastly there are two latches toward the back of the cover....one on each side. You then pull the bottom of the engine cover toward the rear and tilt the top out slowly. It's easy.
Open the locked door on tank, remove the plastic tray, remove the wing nut, slide the filter cover to the right, and tilt upwards , there is the filter.
AnswerTo the right of the rear window defroster button, behind a plastic cover. Just pop it off with a flat head screw driver.On my 1998 Cabrio, I found it to the right of the ash tray. Remove ash tray then slide the cover to the immediate right of the ash tray to the left to reveal the OBDII connector.