Do you mean the clutch master cylinder or Transmission Fluid? They both will be under the hood, the clutch master cylinder will more than likely be on the drivers side near the dash and will say what type of fluid to put in (dot 3) and will say clutch master cylinder. Just open the plastic cap when the fluid is cool and fill to the fill line. I believe as long as the brake fluid says dot 3 or whatever type you need it's okay to use. As for transmission fluid, do NOT use brake fluid for that, buy regular transmission fluid
The clutch fluid is located in the same reservoir as the brake fluid. As a dot 4 brake fluid, used for the breaks and the clutch.
1. Clutch fluid is brake fluid. 2. The fluid used for your clutch master/slave cylinders is pulled from your brake fluid reservoir.
On a 2001 Ford Focus : The brake fluid reservoir is used for the brake and clutch systems
no such thing as clutch fluid. dot 3 brake fluid is to be used in the clutch tank
brake fluid
The fluid used for the hydraulic clutch is DOT 3 brake fluid
On a 2000 Mercury Cougar : The brake fluid reservoir is also used as the clutch fluid reservoir
Dot 3 Brake fluid for Clutch master cylinder.ANSWERTurn the engine off before opening the hood.Find the clutch fluid reservoir. It's usually close to the back of the engine, near the brake fluid reservoir.Take off the cap.Check the fluid level. If it is not filled to the top, you will need to add brake fluid. (See "How to Add Brake Fluid to the Clutch Master Cylinder" under Related eHows.)Replace the cap tightly.
Dot 3 or Dot 4. and if manual the clutch fluid is the same as the brake fluid (Dot3, Dot4)
There really is no such thing as clutch fluid. Wet clutches bath in your engine oil and if they are hydrolic use either DOT 3,4 or 5 brake fluid. On my Royal Star Venture it would be DOT 4 brake fluid
If your car has not been used lately the first thing you would want to do is look at your fluid levels. Most cars have a hydraulic clutch. The reservoir for this is usually next to the brake fluid reservoir. If your fluid is empty then your clutch will feel extremely loose and not work, you need to fill the reservoir and bleed the clutch. I hope this will help.
DOT ( 3 ) brake fluid is used for the hydraulic clutch in a Ford Ranger