In a Ford Ranger , the hydraulic clutch uses ( DOT 3 BRAKE FLUID )
For a 1993 Ford Ranger : ( DOT 3 brake fluid , meeting Ford specification ESA-M6C25-A ) is used as a fluid for the hydraulic clutch
The fluid used for the hydraulic clutch is DOT 3 brake fluid
Not in the transmission , but the hydraulic clutch on a Ford Ranger uses DOT 3 brake fluid
You will need the Ford Hydraulic Clutch Quick Disconnect Tool.
The clutch fluid reservoir is by the Power Distribution Box in your engine compartment which is by the drivers side of the engine compartment ( use DOT 3 brake fluid in the hydraulic clutch )
it is hydraulic. there is no adjustment
On a 1996 Ranger the manual shows to lift the clutch pedal every 5000 miles to adjust the hydraulic clutch - I have no idea if your's is the same
In your engine compartment , mounted on the drivers side inner fender , by your power distribution box ( takes DOT 3 brake fluid for your hydraulic clutch )
yes it is with the slave cylinder being inside the bee housing. the clutch master cylinder reservior is to the right facing the firewall. it requires brake fluid
On a 2001 Ford Mustang the clutch is operated by a cable , so it does not have a clutch fluid reservoir like a hydraulic clutch
changing clutch in 1994 ford ranger ===================================================================== If it is like the ( 1996 ) Ford Ranger The clutch fluid reservoir is in the engine compartment , it is between the Power Distribution Box and the drivers side fender , It takes DOT 3 brake fluid