Pull the fuse, but the abs light will remain on.
dont think it has one, or dose it,
If your brakes are locking up it is because the ABS is not working.
is it a 4x4?? yes
I believe that is in the relay box , in the engine compartment , BETWEEN the battery and the drivers side fender . The ( 2 ) larger relays are the ABS pump relay and the ABS main relay ( NOT the power distribution box / it's called relay module # 3 )
On a 1995 300zx N/A Coupe it is located behind the passenger seat under the plastic cover where the ABS assembly is. It is in a black box on top of the ABS unit under the black cover. There are two relays one has a raised tang on it that is the abs motor relay the other is the solenoid relay. Should be the same for 1990 to 1995 and maybe more and TT should be the same, do not know where the 2+2 relay is.
It is located in the glove box. Left hand side, up top. Fuel pump relay is the middle relay.
the relay is in the abs pump
The "main relay" is inside the abs computer. If you have the Main Relay code, the abs computer has failed.
Examining the braking system is the best place to start when diagnosing an ABS system for the 1995 2WD S10 Blazer. Examine the brake fluid reservoir to check its level. An almost depleted container is a sign of fluid leaks. Leaks can be identified at the calipers, master cylinder or modulator.
In a 1995 Acura Legend, the ABS relay is typically located in the under-hood fuse/relay box. You can find this box on the driver's side of the engine compartment, near the battery. The relay itself is usually labeled, so you can identify it by checking the diagram on the cover of the fuse box. Always refer to the vehicle's service manual for precise details and diagrams.
you have to remove the starter to replace the relay and the relay cost almost as much as the whole starter so you are better off just replacing the whole starter.