Look at the upper end of the brake pedal almost under dash
The brake light switch is behind the brake pedal.
either your parking brake is not released all the way or the switch needs adjusting
under the brake pedal
The 1993 Jeep grand Cherokee brake light switch simply plugs in and out. The brake light switch is located beneath the dashboard on the drivers side of the engine compartment.
The brake light switch is connected to the brake pedal and the brake linkage under the dash with a single bolt.
Yes.
Your fuse could be blown, or the brake light switch is improperly adjusted.
just behind the leg on the brake peddle
To replace the brake light switch on a 2004 Jeep, first disconnect the negative battery terminal to ensure safety. Locate the brake light switch, which is typically mounted on the brake pedal assembly. Remove the electrical connector from the switch, then unscrew the switch from its mounting location. Install the new switch by securing it in place, reconnecting the electrical connector, and finally reconnecting the battery.
Could be failed brake light switch
probably a faulty or mis-aligned brake light switch.
The engine computer through the brake light switch.The engine computer through the brake light switch.