The AC relay on a 2004 Pontiac Vibe is located in the engine compartment fuse box. To find it, open the hood and look for the fuse box, which is typically situated near the battery. Inside the fuse box, the AC relay is usually labeled; consult the diagram on the cover for the specific location. Always ensure the engine is off before attempting to access the relay.
The 2004 Pontiac Vibe typically uses NGK part number 7092 or AC Delco part number 41-101. These are iridium spark plugs designed for optimal performance and longevity. It’s important to check the owner’s manual or consult a professional to ensure compatibility with your specific engine variant.
To reconnect the AC hose to the condenser on a 2004 Pontiac Vibe, first ensure the system is discharged and safe to work on. Align the hose fitting with the condenser port, making sure the O-ring is in good condition to prevent leaks. Push the hose onto the port until it clicks into place, then secure it with the retaining clip if applicable. Finally, check for proper connection and any signs of leaks before recharging the AC system.
1992 Pontiac grand am ac relay locationi found the relays. they are in the center of the firewall next to the blower case. they are in a case with cover that is bolted to the firewall.
The 1995 Pontiac Transport air conditioning relay switch can be found in the fuse box. The air conditioning relay switch will be at the top of the third column.
Where would I finf the relay switch on a 96 Grand Am?.
Hi! Dealer claims entire fuel tank on 2006 Vibe has to be replaced to repair evaporator hose. $800.00 Is this a reasonable solution. Bob
passenger side under glove box...you don't have to remove glove box to get to it...generation vibe forum has clear photos
Kind of tucked in behind the air cleaner behind the driver on the fire wall. It is identical to the fuel pump relay and I do not believe the AC relay is listed any more but the fuel pump relay is.
Check the fan relay.
this relay switch is located behind the glovebox. You have to remove the entire glovebox to get to it
because your ovberflow or condenture tube is clogged remove it and just blow it out with air
under car folow ac lines into small tube protruding out near them