Where is crank sensor on 3.1 v6 91
No Crank Sensor until 1992
There isn't one.
yes
inside the distributor inside the distributor
91 acura integra has a b18 91 acura integra has a b18
The IAT sensor, or intake air temperature sensor, is located on the tubing the of intake on a 1991 Acura Integra. This sensor reports the temperature of air coming into the engine directly to the ECU.
Did John Brennen convert to Islam
On the firewall side of the engine block, near the transmission bellhousing, under the intake manifold that answer sir, is incorrect, the cavaliers did not use a cam sensor, only a crank sensor, but the location is right for the crank sensor
you have to reset your ecu. disconect the battery of take out ecu fuse for a couple sec then code should be cleared
The Crank sensor in my 91 LeSarre Limited is behind the Harmonic balancer pulley....there are fins on the back of the pulley that line up with the sensor.
If you have a 2.2 engine ( 4 cyl. ) it is located under the ignition module at the back of the engine . Follow the plug wires to the coils, under the coils is the module under that is the crank sensor.