0
What else can I help you with?
Where is the crankshaft sensor on a 51 plate Alfa Romeo 147?
on TS engines. at the back of the engine, by the starter (lead to brown connector) 2pin ~860ohm best access from below
Where is the flex plate for crankshaft sensor located on 97 dodge truck 5.2?
The flex plate is the flywheel. It is between the crankshaft and torque converter. The crankshaft position sensor is located behind the passenger side cylinder head, through the top of the transmission case.
where is the crankshaft position sensor on a 2004 hyundai sonata?
its behind the timing cover and reads a plate between two crankshaft sprockets
Where is the crankshaft position sensor in a 1990 Plymouth acclaim located?
It doesn't have a crank sensor. It only has a distributor pick up plate (cam sensor).
Do a 1994 dodge spirit have crankshaft position sensor?
No, just the pick up plate in the distributor.
Where is the camshaft position sensor on a 2002 Dodge Intrepid?
CRANKSHAFT POSITION SENSOR The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing Crankshaft Position Sensor The bottom of the sensor sits above the drive plate REMOVAL Disconnect electrical connector from crankshaft position sensor. Remove sensor mounting screw. Remove sensor. INSTALLATION Install sensor and push sensor down until contact is made with the transmission case. While holding the sensor in this position, install and tighten the retaining bolt to 12 N·m (105 in. lbs.) torque. Connect electrical connector to crankshaft position sensor.
Where is crankshaft sensor located on a 1990 dodge ram van with a 318 engine?
It doesn't have a crank sensor. It only has the "pick up plate" in the distributor.
What is the crankshaft sensor location on a 1990 Dodge Ram 3.9L V6?
It is the pick up plate inside the distributor.
Where is the crankshaft sensor on a 1991 dodge ram charger 5.2?
It doesn't have a crank sensor. All it has is the "pick up plate" in the distributor, under the rotor inside the cap.
Where ie the crankshaft sensor located on 1992 Lexus ls 400?
Its on the drivers side of the crankshaft pulley (the large black pulley with the white line). If you remove the skid plate and look up from underneath the car you should be able to see it, it is the only sensor in the area of the pulley.
Is alpha plate silver plate?
No, alpha plate is not silver plate. Alpha plate is a type of base metal plating that contains alpha brass, which typically consists of copper and zinc. Silver plate, on the other hand, is a thin layer of silver that is electroplated onto a base metal.
Where is the camshaft position sensor located on a 2002 Chrysler Concorde?
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing. The bottom of the sensor is positioned next to the drive plate. The cam sensor is located on the left bank cylinder head
