answersLogoWhite

0

Virtually all automobiles have a drain plus (petcock) on the bottom of the radiator for the purpose of draining coolant. Your car should have that on the inside of the radiator, on the botom, on the driver side of the car.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you drain coolant from engine block on Nissan Quest 2001?

Open the drain valve on the side of the engine block.


How do you drain engine coolant on 2001 Chevrolet Impala?

Just beneath the lower radiator hose is the drain.


How do you drain the radiator on 2001 gmc sonoma truck?

To drain the radiator on a 2001 GMC Sonoma, first ensure the engine is cool and then locate the radiator drain plug at the bottom of the radiator. Place a drain pan under the radiator, open the drain plug, and allow the coolant to fully drain out. After draining, close the plug securely, and refill the radiator with fresh coolant. Be sure to dispose of the old coolant properly, as it is toxic.


How do you change coolant Mazda mpv 2001?

To change the coolant in a 2001 Mazda MPV, start by ensuring the engine is cool and then locate the radiator drain plug at the bottom of the radiator. Place a container underneath to catch the old coolant, open the drain plug, and allow the coolant to fully drain out. After draining, close the plug, refill the radiator with the appropriate type and mixture of new coolant, and run the engine for a few minutes with the heater on to circulate the new coolant. Finally, check the coolant level and top off if necessary, ensuring there are no leaks.


Where is the coolant drain plug for 2001 jaguar XJ8?

The coolant drain plug for a 2001 Jaguar XJ8 is located on the engine block, typically on the lower side, near the water pump. It can be accessed from underneath the vehicle, so make sure to use caution while working under the car. Always ensure the engine is cool before attempting to drain the coolant, and be prepared to catch any fluid that drains out.


How do you change coolant in 2001 Lincoln contienetal?

To change the coolant in a 2001 Lincoln Continental, first ensure the engine is cool, then locate the radiator drain valve at the bottom of the radiator and open it to drain the old coolant into a container. Next, close the drain valve and refill the radiator with a 50/50 mix of new coolant and distilled water through the radiator cap. After filling, run the engine with the heater on high for a few minutes to circulate the coolant, then check the level and top off as necessary. Finally, dispose of the old coolant properly, as it's toxic.


Changing a turbo in a 2002 Passat. Can not find the screw on the block to drain coolant from the engine. Also is the 2001 passat's coolants drain plug in the same location?

try on radiator..


Where is the radiator drain on a 2001 Cadillac sts?

The radiator drain on a 2001 Cadillac STS is located at the bottom of the radiator on the driver's side. It typically features a petcock or drain valve that can be turned or pulled to allow coolant to flow out. To access it, you may need to lift the vehicle for better visibility, but make sure the engine is cool before attempting to drain the coolant to avoid burns. Always have a container ready to catch the coolant as it drains.


Where is the engine coolant temperature sensor on a 2001 Buick LaSabre?

wher is the engine temperature coolant sensor BUICK 2001


Where is the coolant drain plug on 2001 Toyota Tundra?

There are actually three coolant drain plugs on the 2001 Tundra. Speaking of a 4.7 liter engine, there is one drain plug at the bottom of the driver's side of the radiator. The skid plate/splash shield need to be removed in order to access this. It is a plastic butterfly type and should be easily removed by hand or with the aid of pliers. The other two are located on the driver's side of the engine block. This truck takes over 12 quarts of coolant so these two drain plugs need to be opened in order to completely empty the coolant from the system.


How do you drain the cooling system on a 2001 suburban?

To drain the cooling system on a 2001 Chevrolet Suburban, first ensure the engine is cool and then locate the radiator drain plug at the bottom of the radiator. Place a drain pan underneath, open the drain plug, and allow the coolant to fully drain out. Additionally, you may want to remove the lower radiator hose for a more complete drainage. After draining, close the drain plug or reattach the hose and refill the system with the appropriate coolant mixture.


Where is the engine coolant temperature sensor on a 2001 Ford Escort ZX2?

Follow the upper radiator hose to a plastic casing near the engine. It's inside. 3 nuts will need to be removed to access the housing.