The drain plug on a Peugeot 307 HDi gearbox is typically located at the bottom of the gearbox casing. It may be identified as a hexagonal bolt, which you can remove to drain the Transmission Fluid. Ensure the vehicle is securely lifted and supported before attempting to access it, and always use the correct tools to avoid damaging the plug. It's advisable to check your vehicle’s manual for specific details related to your model.
it has not got one you have to remove gear box sump plate
To drain the gearbox on a Citroën Saxo, first ensure the vehicle is securely lifted and supported. Locate the gearbox drain plug, usually found at the bottom of the gearbox, and use a socket or wrench to remove it. Allow the oil to fully drain into a suitable container, then replace the drain plug and tighten it securely. Finally, refill the gearbox with the appropriate oil through the filler hole, checking the level with the dipstick if applicable.
To change the gearbox oil on a Hyundai Getz, first ensure the vehicle is on a level surface and securely raised. Remove the gearbox drain plug and let the old oil drain completely. Once drained, replace the drain plug and remove the fill plug on top of the gearbox. Finally, use a funnel to add the recommended type and amount of new gearbox oil through the fill hole, then replace the fill plug securely.
From the right side of the bike, get down and look underneath the area where the gearbox is located, you will see a drain plug in the middle of the gearbox casing (obviously for the gearbox) and nearer to the outside of the bike there is a same size drain plug in a small down tube which is open at the bottom and is connected to the oil tank.
To change the gearbox oil on a Peugeot 106 XN, first ensure the vehicle is securely elevated. Remove the gearbox oil drain plug and allow the old oil to fully drain out. Replace the drain plug and then locate the oil filler plug, removing it to add new gearbox oil using a funnel. Fill the gearbox with the recommended oil until it reaches the appropriate level, then replace the filler plug and check for any leaks.
To change the gearbox oil on a Toyota MR2, first ensure the vehicle is safely lifted and secure. Remove the drain plug from the gearbox and allow the old oil to fully drain out. Once drained, replace the drain plug and then remove the fill plug; use a funnel to pour in the new gearbox oil until it reaches the appropriate level. Finally, replace the fill plug, and check for leaks before lowering the vehicle.
To change the gearbox oil on a Renault Laguna 1.8, start by ensuring the vehicle is on a level surface and securely raised. Remove the drain plug from the gearbox and allow the old oil to fully drain out. Once drained, replace the drain plug and remove the fill plug, then use a funnel to pour in the new gearbox oil until it reaches the proper level. Finally, reattach the fill plug and check for any leaks.
Coolant drain plug ? Oil Drain Plug ? Atf Drain plug? Gearbox Drain plug? More Specific Pwease? its probably the oil plug he is sourcing, remove the splash tray and the sump plug will be just above it, you can drop the oil without removing, its just a bit messy.
To change the gearbox oil on a 1995 Renault Clio, first ensure the car is on a level surface and securely raise it with jack stands. Remove the gearbox drain plug to let the old oil drain completely, then replace the plug. Next, locate the fill plug on the side of the gearbox and use a funnel to pour in the new gearbox oil until it reaches the fill hole. Finally, securely replace the fill plug and check for any leaks.
To change the gearbox oil on a Peugeot 306 petrol, start by ensuring the vehicle is on a level surface and secure it with wheel chocks. Remove the drain plug from the gearbox and let the old oil drain completely into a container. Once drained, replace the drain plug and remove the fill plug on the side of the gearbox. Using a funnel, add the recommended gearbox oil until it reaches the fill level, then replace the fill plug securely.
To change the gearbox oil on a 2006 Citroën Dispatch, start by ensuring the vehicle is securely raised and level. Remove the drain plug from the gearbox and let the old oil drain completely. Once drained, replace the drain plug, then locate the fill plug, and use a funnel to pour in the new gearbox oil until it reaches the correct level. Finally, replace the fill plug and check for any leaks before lowering the vehicle.
To change the oil in the gearbox of a Vauxhall Movano, start by lifting the vehicle and securing it on jack stands. Locate the gearbox drain plug at the bottom and remove it to drain the old oil into a suitable container. After draining, replace the drain plug and find the fill plug, usually located on the side of the gearbox; remove it and use a funnel to add new gearbox oil until it reaches the appropriate level. Finally, replace the fill plug and ensure everything is secure before lowering the vehicle.