Bank 1 is the passenger side of the engine on your Ford Excursion Sensor 2 would be in the exhaust after it passes through the catalytic converter ( downstream )
The exhaust back pressure sensor on a 2006 6.0 diesel Ford F3 50 can be located near the exhaust manifold. The sensor is a probe that can be removed by loosening the nut.
A Ford diesel diagnostic code P0470 means there is an exhaust pressure sensor malfunction. This may be caused by faulty exhaust back pressure sensor, or pressure sensor is open or shorted.
the passanger side coming out of the heads, on the exhaust, before the catalytic converter
Mass Airflow Sensor
abs sensor
driver side on front of head, just follow the tube from the exhaust manifold on the drivers side and its there.
33-36 psi
I do not own a Ford but do you mean the MAP sensor? Map is Manifold Air Pressure If you did mean a MAP Sensor. (ON a Diesel 7.3) Slide under the front of the truck and it is up between the radiator on the engine block below the fan
I believe on your exhaust
There is no fuel pressure sensor.
02 sensor is either in exhaust manifold, or in exhaust pipe between manifold and muffler