by the drivers side engine mount.
on a mk3 Espace the ECU is bolted on to the drivers (left) hand side of the bulkhead and is enclosed in a grey coloured box with clips.
Hard to open a glove box that doesn't exist. because the mk3 jetta doesn't come with a glove box.
To replace the glove box damper on a Mk3 Mondeo, first, open the glove box and remove any contents. Next, locate the damper at the hinge area; it may be held in place by clips or screws, which you'll need to remove. Once detached, install the new damper by reversing the removal process, ensuring it is securely fastened. Finally, close the glove box to check if it opens and closes smoothly.
Just replaced mine on a 51 plate its bolted on side of turbo
the fuse box is behind the glovebox you have to release the clip on the back of the glove box then pull the compleate thing out , then you can acsses the fuse box,s its fuse no 18 that you need to change http://www.fordmondeo.org/wiki/index.php/Image:Glovebox_relays.jpg
In the fuse box
The thermostatic switch is located near the top right hand side of the radiator (if your facing car).
On a Clio MK3, the blower resistor pack is typically located behind the dashboard, near the blower motor. To access it, you may need to remove the glove compartment and some trim panels. It's usually mounted on or near the heater box. If you're having difficulty locating it, consulting a repair manual specific to your model can provide detailed guidance.
Where can you find a fuse box for mondeo mk3 lx
Under the steering wheel. left side.
this is an how to: http://www.4130-products.com/step/ign/index.htm