0
What else can I help you with?
How do you drain the torque converter on a 1998 Ford Contour?
There is no drain.
How do i Drain torque converter in 1998 dodge neon?
You can't. Dodge doesn't have torque converter drain plugs. You have to have the trans flushed to completely change the oil in it.
How do you change transmission torque clutch converter on 98 Chevy cavalier?
To change the transmission torque converter on a 1998 Chevy Cavalier, first, ensure the vehicle is securely lifted and supported. Drain the transmission fluid and remove the transmission pan to access the torque converter. Disconnect the torque converter from the flexplate and remove the transmission from the engine, then replace the old torque converter with the new one before reinstalling the transmission and pan. Finally, refill the transmission with fluid and check for leaks.
Does a 1998 Jeep Wrangler have a torque converter?
Automatic, yes. Manual, no.
Is there a drain plug on a 1998 Hyundai Tiburon torque convertor?
No, there is not.
Where is the torque converter on a 1998 cavalier z24?
In the transmission held on by 3 bolts
1998 Chevy blazer transmission drain plug location?
It don't have 1. you must remove the transmission pan to drain the fluid.
How do you change the torque converter clutch on a 1998 Mercury Sable?
The torque converter clutch is inside of the toque converter. You must replace the whole torque converter as an assembly. The torque converter is sandwiched between the engine and transmission inside the transmission bellhousing. To access and replace the torque converter, the transmission will have to be removed. The trnsmission on that car is removed by raising the car on a hoist, supporting the engine with a special engine support tool, removing the lower engine cradle assmebly, and removing the transmission out through the bottom of the vehicle.
Where is the torque converter on a Chevrolet Astro 98?
In a 1998 Chevrolet Astro, the torque converter is located within the transmission assembly. Specifically, it is situated between the engine and the transmission, housed inside the bell housing of the transmission. To access the torque converter, you typically need to remove the transmission from the vehicle, as it is not externally accessible.
Torque spec for a 1998 S-10 blazer wheel bearing and axle nut?
103 ft lbs
If your 1998 dodge ram 1500 has a 5.2 can you put a 5.9?
Sure, if the computer and torque converter are for a 5.9L
How do you change a flywheel for a 1998 Ford Contour?
flywheel replacement generally requires removal of the Transmission and Torque Converter .
