Beneath the A frame is the easiest if you have a standard jack. It's a frame shaped like an A. If you have a no clue what that is just knock on a few items with your fist a few inches away from the tire under the car and avoid anything hollow or that you feel like you could damage.
For a 2012 Chevy Impala, the floor jack points are located under the vehicle near the front and rear axles. At the front, you should position the jack under the frame rail just behind the front wheels. For the rear, the jack points are found at the rear axle or under the frame rail just ahead of the rear wheels. Always consult the owner's manual for specific guidelines and safety precautions.
Raise the glass and prop it safely in the open position. This reveals the struts that operate the window. At this point it should be clear to you how to unbolt and replace them.
front or either side of front of vehicle - position floor jack under front frame lift points rear or either side of rear of vehicle - position jack under the pinch point notches
What type of vehicle? paul 1997 camero rs convertable If you have coil springs in the rear, you need to have two jacks. One will jack up the car up to take the tire off and be able to get to the shocks. The second jack will be used to stabilize the bottom of the coil pan so it doesn't drop down once you remove the shock and it will stay in perfect position to replace the new shock.
SHOULD BE IN THE REAR STORAGE COMPARTMENT WHERE THE JACK IS ON DRIVER SIDE SHOULD BE IN THE REAR STORAGE COMPARTMENT WHERE THE JACK IS ON DRIVER SIDE
To jack up a 2004 Chevy Tahoe to replace a tire, first ensure the vehicle is on a flat surface and engage the parking brake. Locate the jack points, typically found behind the front tires and in front of the rear tires. Position the jack under the appropriate jack point and raise the vehicle until the tire is off the ground. Finally, remove the lug nuts and take off the tire for replacement.
What should it cost to replace rear brakes, drums and rotors, '96 Volvo 850 GLT.
Support the car on axel stands under rear jacking points then undo shock absorber and then the axel should fall down lower using a jack to support it making the spring loose and should be able to remove and replace.
To lift a 2004 Toyota Matrix with a jack, locate the jack points under the vehicle. For the front, use the reinforced areas behind the front wheels, while for the rear, position the jack under the center of the rear axle or the designated rear jack points on either side. Always ensure the vehicle is on a flat surface and use jack stands for safety after lifting.
Open the rear hatch and take the cargo mat out. Lift the panel closest to rear seat--the jack should be stored beneath it.
To replace the rear axle splash guards on a 2003 Yukon, first, raise the vehicle and secure it with jack stands. Remove the rear wheels to access the splash guards, then unbolt or unscrew the old guards from their mounting points. Position the new splash guards in place and secure them using the original hardware. Finally, reattach the wheels, lower the vehicle, and ensure everything is properly tightened.
96 dodge ram side rear view mirror will not stay in position