right beneath the oil filter. There is a blue wire attaching to it.
I have a 2000 king quad 300 and you add the oil in rear axle theres a screw out plug
4.0
Add brake oil
5 on an oil change w/ filter
go to the court house and apply for a duplicate title
The Ford 545 C Tractor -- serial number withC would manufactred between the years of 1990 and 1991 , replaced by the 545D model in 1994 - 2000
No, you add oil at the oil fill cap on top of the engine.
Park the vehicle on a level surface. Drain the oil, and change the filter. Add 4 quarts of oil and start the engine. Run for 45 seconds and shut down. Wait 45 minutes and check the oil level. Add as necessary to top it off keeping track of how much you add. You now know the capacity.
To add transmission oil on a 2000 FXDWG with an 88ci engine, locate the transmission fill plug, which is typically found on the right side of the transmission case. Use a 1/2-inch drive socket or a wrench to remove the fill plug. Add the appropriate type and amount of transmission oil until it reaches the fill hole, then replace the plug securely. Always check your owner's manual for the specific oil type and capacity.
Under the hood. On the driver side.
where is the oil plug on a 2000 fatboy?