If you are running the V6 yes
Ive been told Toyota corolla and a ford pickup
Makes it easier to tighten the filter by hand by reducing friction.
Remove the old filter, apply a coat of oil to the gasket of the new filter, screw the new filter on and tighten it only 3/4 turn after it makes contact with the mounting surface.
Remove the old filter. Oil the gasket on the new filter and install. Tighten it 3/4 turn after it makes contact with the mounting surface.
Buy the correct filter for your car and it will fit. If you mean how to install it then oil the gasket and tighten the filter 3/4 turn after it makes contact with the mounting surface. Do not over-tighten.
I have been searching on the net and found out that WIX makes the carquest oil filters. If you look at the carquest oil filter box it will say Wix Filtration.
Apply a thin coat of oil to the gasket of the new filter. Tighten the filter 3/4 turn after it makes contact with the mounting surface. NO MORE NO LESS!
The starter should be tight! It can cause an oil leak if it hits the oil filter and makes a hole in it (oil filter is like a coke can). If your starter is moving you must first tighten it down it's two bolts.
Purolator Pure One is bascially a Ford Filter
Remove the old filter. Replace it with a new filter. Before installing the new filter wipe the mounting surface clean and apply a coat of oil to the new oil filter's gasket. Spin on the filter and tighten it 3/4 turn after it makes contact with the mounting surface. No, more and no less. If you still see oil leaking from the filter then look above the filter for the leak. Possibly valve cover is leaking.
No because oil filter i meant for oil to go on the filter air filter does not need oil